User Guide
Speaker for
iPad / iPhone / iPod
For Your Safety
Congratulations on the purchase of your new iPad speaker system.
To get the most from your speaker system, please take a few minutes to
read the following instructions and familiarize yourself with the operation
of the unit. Before setting up the unit, please check that the following
items should be included in the box:
1. iPod/iPhone/iPad Speaker
2. AC Power Adaptor
3. 3.5mm Audio Cable for Aux Input
4. Remote control
Product Front View
handle the DC power plug with wet hands - this can cause electric shock.
Care and Maintenance for the Unit
Remote control
Press
button 2 seconds to turn on/off the speaker, the LED will
display red color when the speaker is power on.
A1: VolA2: Power/Mode
A3: LED
A4: Vol+
1
4
6
1 2 3 4
cleaning.
Remark: It is suggested that you should clean both the charging base
and speakers periodically to ensure good contact between the speaker
and base charging contacts.
Unpack your unit carefully.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
2
3
supply.
Unpacking and Installation
Power control
5
7
8
9
10
11
Product Rear View
T
direct sunlight. Keep it away from water.
y.
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
Power
mode
iPod Menu up *
iPod
iPod Up
Play/Pause
iPod Menu down *
iPod Menu
Enter
Vol. - *
Vol. +
B1: DC in jack,
B2: Line in jack
Technical specification
Volume control
Power supply: AC 100~240 V/ 50~60 Hz
Selecting a source
Dimensions: 378 x 134 x 153 mm
You can choose to play music from iPod/iPhone/iPad, or other
To listen to music from line in jack
1. Connect one end of the 3.5mm audio cable to the audio output port
r, etc) and connect the other
end of the cable to the line in jack on the rear of the speaker
2. Press button to turn on the speaker, the LED light will display red
color, and the speaker is in line in mode
To listen to music from iPod/iPhone/iPad
* Some buttons function only with the pre-loaded iPod player on the
iPad, some software applications do not allow use of the remote.
Such as "Menu"
open it.
T
1
2
After using the speaker
Switch the unit of
1. Press
button to turn on the speaker, the LED will display red color
2. Dock your iPod/iPhone to the connector, the speaker will be in iPod
mode automatically, and the LED will display Blue color
This symbol on the product or in the instructions means that your electrical and
separately from your
household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you
purchased the product.
Product operation
Connecting power
AC
Imported by Brazil eTIGER Tecnología Digital
C.N.P.J. 04.933.508/0001-01
I.E. 206.259.044.118
www.etiger.com.br
Origin: RPC
Plug the DC cord from the adaptor into the unit, plug the
mains plug into the wall socket.
HF-IPS-142ET
GB-1
GB-2
Cuidados e Manutenção da Unidade
GB-3
GB-4
Vista Frontal do Produto
GB-5
Controle remoto
Controle liga/desliga
Pressione o botão
Dock Station para iPad / iPhone / iPod
atentamente as instruções a seguir e familiarizar-se com
a operação da unidade.
Longo periodo sem uso
por 2 segundos para ligar/desligar o Dock Station,
A1: Volunidade.
1
A3: LED
A4: Vol+
de tempo.
2 1.
3
Conteúdo da embalagem:
1. Dock Station eTiger 142ET
2. Adaptador de Voltagem
3. Cabo de Áudio de 3,5mm para Entrada Auxiliar
4. Controle remoto
5. Manual do usuário
6. Certificado de garantia
7. Acoplamento para iPad, iPhone e iPod
4
6
AVISO:
2.
Modo
3.
Menu iPod para cima *
4.
iPod: Retrocesso
Especificações
Fonte de alimentação: 100~240VCA 50~60 Hz
Entrada: 12Vdc 1,5A
Alto falantes: 2 x 3 polegadas
iPod: A
Selecionando uma fonte
8
9 6.
7.
Tocar/Pausar
V
10
11 8.
Menu iPod
A
Desembalagem
Liga
7 5.
1 2 3 4
carga para assegurar bom contato.
5
Vista Traseira do Produto
Dimensões (L x A x P): 378 x 153 x 134 mm
Peso: 1.465 g
Menu iPod para baixo *
9.
Entre
10.
Vol – *
11.
Vol +
conecte a outra ponta do cabo ao conector de entrada auxiliar na
traseira do Dock Station.
B1: Conector de entrada CC
B2: Conector de entrada auxiliar
a caixa e materiais de acondicionamento, caso deseje armazenar a
.
Ao reciclar, reutilizar os materiais ou outras formas de utilizar
contribuição para proteger nosso meio-ambiente
A
do produto.
Para Sua Segurança
Ao desconectar o cabo de força de uma tomada, puxe pelo plugue.
1
HF-IPS-142ET
L
3
no iPad.
como por exemplo a função “Menu”.
Para escutar música de iPad/iPhone/iPod
Operação do produto
Ligando na força
2.
Importado por eTIGER Brasil Tecnologia Digital
C.N.P.J. 04.933.508/0001-01
I.E. 206.259.044.118
www.etiger.com.br
Origem: RPC
V
plugue de rede na tomada da parede.
PT-1
GB-6
PT-2
PT-3
PT-4
PT-5
PT-6