Evolution® exterior – The Elevator
That Comes On From Outside.
Improving Access to
Existing Residential Buildings.
Evolution® exterior.
Numbers, Data, Facts.
Rated load
450 kg
Nominal speed
1.0 m/s
Passengers
6
Maximum travel height
30 m
Starts per hour
180
Car width / depth / height
1000 / 1200 / 2200 mm
Starting current
9.0 A
Rated current
5.5 A
Drive type
VVVF frequency regulation – Isostop 60
Shaft interior width / depth
1410 /1500 mm
Shaft head
3650 mm
Shaft pit
1300 mm
Car depth = 1200
Auxiliary control
box only at the
uppermost stop!
210
Steel shaft structure
Frame, exterior = 1700
Shaft depth = 1500
Shaft plan
Door width = 800
Car width = 1000
Shaft width = 1400
Frame, exterior = 1600
Thyssen Aufzüge
Thyssen Aufzugswerke GmbH
A Company of Thyssen Aufzüge Division
P.O. Box 23 03 70, D-70623 Stuttgart, Germany
Telephone: +49 (0) 71 58 12 - 0, Fax: + 49 (0) 71 58 12 - 25 85
e-mail: [email protected], www.thyssen-aufzuege.com
Printed in Germany W 313-0/E 01/01
The details quoted in this brochure can only be
viewed as binding when confirmed expressly in
writing.
A Company
of ThyssenKrupp
Industries
TK
Presented by:
A Quick, Complete Solution.
Sensible Makes Rentable.
Technology and Performance.
Intelligent and Safe.
Residential buildings become more
attractive and more lucrative with a
trouble-free retrofit. The Evolution®
exterior – a revolutionary concept in
technology and support.
High-concentrated capability.
Progressive and proven as a
single source solution, the
Evolution® exterior increases
the value of residential buildings such as those made from
prefabricated slabs. Innovative
technology is but one way you
profit from this new lift system.
You also get the support of the
Thyssen Aufzüge organization,
which assumes the entire
responsibility for planning and
project coordination.
Setting up the Evolution® exterior requires but a few hours.
The elevator will be completely installed within a few days.
Like a permanent employee
in the building.
The Evolution® exterior is
delivered to the building site in
prefabricated shaft sections.
Generally speaking, a delivery
includes three sections. This
significantly reduces the installation time. In other words, the
complete installation can be
realised within a few days; the
elevator is even completely
positioned within a few 4 hours.
The timing during the connecting phase is just as convenient; the stairwell need remain
open for no more than two
days. This allows you to carry
out the work at virtually any
time of the year. When completed, the building is fully
sealed with access to the upper
floors dramatically improved.
The result: increased acceptance by the residents and
maximized rentability.
s
The passenger elevator designed especially for improving the
rentability of residential buildings, particularly for increasing
the accessibility of existing buildings which previously had no
elevator.
s
Also ideal for tight building constellations as a result of minimal shaft dimensions.
s
Maintenance free, gearless high performance drive Thyssen
Mini gearless® with minimal space requirements of the shaft
head. The most modern elevator technology, requiring no
machine room or auxiliary systems or devices outside the
shaft.
s
Jerk free comfortable ride due to modern frequency control.
Furthermore the temperature independent stopping accuracy
prevents stumbling points. Rubber insulation makes for a
virtually silent operation.
s
A low connected load enables – particularly in comparison
with hydraulic systems – a connection to a low-capacity
mains supply, improving cost savings.
s
Roller guides make the Evolution® exterior an oil-free elevator.
This means no filling, leaking, or disposal of oil. Instead you
get a system which is easy to maintain and which stays clean
longer because it doesn’t absorb dirt.
s
Minimum impact of forces on the building thanks to a centred
lift car suspension – a principle which also significantly
prolongs the life of the guides.
s
Integrates into the Teleservice emergency and telemonitoring
system. The need for an attendant could thereby be
eliminated.
s
Tested quality and dependability including the European type
testing certificate MA 011 in accordance with EC guideline
95/16/EG.
Clearly attractive. Direct access for all residents.
Flexibility and Design.
Advantageous and Transparent.
Clearly compact. An innovative drive concept with
space-saving integration into the head of the shaft.
Clearly accessible. Renting out the upper floors in
multi-story buildings is now much easier.
s
High-quality system architecture creates a more impressive
building exterior.
s
Door clearance of 800 mm enables the transport of even
bulky objects such as wheelchairs or baby carriages.
s
Daylight enters through the back wall which is completely
glazed. Because the shaft can always be observed from the
outside, the danger of vandalism is reduced.
Evolution® – The Program.
There are always different requirements. And always just the
right Evolution® for the job. Besides the Evolution® exterior,
we also offer the Evolution® classic, the standard solution for
a wide variety of commercial and residential buildings; the
Evolution® flexible with its various elevator car dimensions
provides a convincing fit for custom projects; or the Evolution®
compact with a minimized 300 mm shaft recess for trouble-free
elevator installations when the space underneath is limited or
when extreme cost restrictions are present.
We are happy to provide information in person, in writing, or via
the Internet at www.thyssen-aufzuege.com.
Download

Evolution® exterior - ThyssenKrupp Elevadores