Nuno Alves Curriculum Vitae, January 2015
CURRICULUM VITAE
Personal data
Nuno Manuel Fernandes Alves
Centre for Rapid and Sustainable Product Development
Polytechnic Institute of Leiria
Centro Empresarial da Marinha Grande, Rua de Portugal, 2430-028 Marinha Grande,
Portugal
Tel. (+351) 244 569 441; Fax: (+351) 244 569 444; E.mail: [email protected]
Department of Mechanical Engineering
School of Technology and Management
Polytechnic Institute of Leiria
Campus 2, Morro do Lena – Alto do Vieiro, Apartado 4163, 2411-901 Leiria
Tel. (+351) 244 820 300; Fax: (+351) 244 800 310; E.mail: [email protected]
Academic education
2006
Doctor of Philosophy, Ph.D., Technical University of Lisbon, Portugal
2000
Master of Science, MSc, Technical University of Lisbon, Portugal
1994
Licenciatura degree in Mechanical Engineer, Technical University of
Lisbon, Portugal
Previous activity and current scientific and/or profissional activities
Since 2014
Director of the Centre for Rapid and Sustainable Product
Development, Polytechnic Institute of Leiria
Since 2014
President of the Scientific Council of the Centre for Rapid and
Sustainable Product Development, Polytechnic Institute of Leiria
From 2009 to 2013 Vice-Director of the Centre for Rapid and Sustainable Product
Development, Polytechnic Institute of Leiria
1
Nuno Alves Curriculum Vitae, January 2015
From 2009 to 2013 Member of the Scientific Council of the Centre for Rapid and
Sustainable Product Development, Polytechnic Institute of Leiria
From 2007 to 2011 Member of the Scientific Committee of the MSc in Engineering
Design and Product Development, Polytechnic Institute of Leiria
From 2007 to 2009 Member of the Centre for Rapid and Sustainable Product
Development, Polytechnic Institute of Leiria
2007
Reviewer of Researchers for South Africa Science Foundation
From 2006 to 2007 Member of the Pedagogical Committee of the School of
Technology and Management, Polytechnic Institute of Leiria
Since 2006
Assistant Professor at the Mechanical Engineering Department,
School of Technology and Management, Polytechnic Institute of
Leiria
From 2006 to 2008 Course Director of Mechanical Engineering Programme at the
School of Technology and Management, Polytechnic Institute of
Leiria
From 2006 to 2008 Member of the Scientific Committee of the Mechanical
Engineering Programme at the School of Technology and
Management, Polytechnic Institute of Leiria
From 2006 to 2008 Coordinator at the Mechanical Engineering Department of the
Socrates/Erasmus
Program,
School
of
Technology
and
Management, Polytechnic Institute of Leiria
From 2006 to 2007 Fellow of the Institute of Polymers and Composites of the
University of Minho
From 2000 to 2005 Researcher at the Mechanical Engineering Institute of Lisbon
(IDMEC), Technical University of Lisbon
From 1998 to 2002 Member of the Pedagogical Committee of the School of
Technology and Management, Polytechnic Institute of Leiria
From 1997 to 2005 Lecturer at the School of Technology and Management,
Polytechnic Institute of Leiria
2
Nuno Alves Curriculum Vitae, January 2015
From 1994 to 1997 Engineer at the Metalúrgica Progresso de Vale de Cambra, Portugal
Domain of specialization
Computer modelling and simulation
Reverse engineering (3D Scanning)
Advanced manufacturing processes
Current research interests
Computer vision and photogrammetry
Reverse engineering
Computer modelling and simulation
Multiobjective optimisation
Additive manufacturing and Biomanufacturing
Biomimetics and Bioinspiration
Rapid product development
Mould design and polymer injection moulding
Courses developed and/or offered
Product modelling and simulation
Computer-aided design
Computer-aided engineering
Computer-aided manufacturing
Machine design
Computer-integrated manufacturing
Optimisation
Introduction to research
Advanced manufacturing technologies
Product design
Biomimetics
Awards
2006
Teaching Award, School of Technology and Management, Polytechnic
Institute of Leiria
3
Nuno Alves Curriculum Vitae, January 2015
2005
Best Paper Award at the 2nd International Conference on Advanced
Research in Virtual and Rapid Prototyping
2002
PRODEP Grant for PhD studies
Research
Publications
Books
1
High value manufacturing - advanced research in virtual and rapid prototyping,
Co-editor, CRC Press, 2014 (ISBN: 978 1 138 00137 4)
2
Green design, materials and manufacturing process, Co-editor, CRC Press, 2013
(ISBN: 978 1 138 00046 9)
3
Innovative developments in virtual and physical prototyping, Co-editor, CRC
Press, 2012 (ISBN: 9780415684187)
4
Sustainable Intelligent Manufacturing, Co-editor, IST Press, 2011, (ISBN 978989-8481-03-0)
5
Innovative developments in design and manufacturing - advanced research in
virtual
and
rapid
prototyping,
Co-editor,
CRC
Press,
2010
(ISBN:
9780415873079)
6
Proccedings of the international conference on tissue engineering, Co-editor, IST
Press, Lisboa, 2009 (ISBN: 978-972-8469-90-0)
7
Virtual and rapid manufacturing, Co-editor, Taylor&Francis, 2008 (ISBN: 978-0415-41602-3)
8
Virtual modeling and rapid manufacturing - advanced research in virtual and
rapid prototyping, Co-editor, Taylor&Francis, UK, 2005 (ISBN 0415390621)
Book chapters and papers in books
9
Alves, N., Bartolo, P.J., Gaspar, M., Martins-Ferreira, N., Mateus, A. BioFab
Toolbox – Software tools for biofabrication, in: High value manufacturing advanced research in virtual and rapid prototyping, Edited by P.J. Bártolo et al,
CRC Press, 2014 (ISBN: 978 1 138 00137 4)
4
Nuno Alves Curriculum Vitae, January 2015
10
Gaspar, M., Alves, N., Martins-Ferreira, N., Bartolo, P.J. Innovative developments
on Agile-CAD system, in: High value manufacturing - advanced research in virtual
and rapid prototyping, Edited by P.J. Bártolo et al, CRC Press, 2014 (ISBN: 978 1
138 00137 4)
11
Carreira, P., Alves, N., Ramos, C., Bartolo, P.J. Tool concept for prepreg fabric
overmould, in: High value manufacturing - advanced research in virtual and rapid
prototyping, Edited by P.J. Bártolo et al, CRC Press, 2014 (ISBN: 978 1 138
00137 4)
12
Ramos, C., Carreira, C., Bártolo, P., Reis, I, Durão, L and Alves, N.
Optimalmould: Energy consumption in injection moulding optimization, in:
Green design, materials and manufacturing process, Edited by H. Bártolo et al,
CRC Press, 2013 (ISBN: 978 1 138 00046 9)
13
J. Frazão, H. Almeida, P. Bártolo, N. Alves, Comparison of bone remodeling
algorithms for hip implants, in: Innovative developments in virtual and physical
prototyping, edited by P. Bártolo et al., CRC Press, 2012 (ISBN: 9780415684187)
14
Domingues, F., Silva, C., Alves, N., Almeida, H., Bártolo, P.J., Evaluation of
diferente fitting algorithms using CMM and a white fringe projection system, in:
Innovative Developments in Virtual and Physical Prototyping, edited by P.
Bártolo et al., CRC Press, 2012 (ISBN: 978 0 415 68418)
15
Ferreira, R., Leal, I., Alves, N. and Bártolo, P.J. AgileCAD for reverse
engineering, in: Virtual and rapid manufacturing, edited by Paulo Bartolo et al.,
Taylor&Francis, 2008 (ISBN: 978-0-415-41602-3)
16
Ferreira, J.C., Bártolo, P.J. and Alves, N. Rapid metal casting - a review of
present status, in: Virtual and rapid manufacturing, edited by Paulo Bartolo et al.,
Taylor&Francis, 2008 (ISBN: 978-0-415-41602-3)
17
Mateus, A.J., Almeida, H.A., Ferreira, N.M., Alves, N., Bártolo, P.J., Mota,
C.M.and Sousa, J.P. BioExtruder for tissue engineering applications, in: Virtual
and rapid manufacturing, edited by Paulo Bartolo et al., Taylor&Francis, 2008
(ISBN: 978-0-415-41602-3)
5
Nuno Alves Curriculum Vitae, January 2015
18
Alves, N. and Bártolo, P.J. Virtual modelling trough human vision sense, in:
Research in interactive design, edited by X. Fischer and D. Coutellier, Springer,
2006 (ISBN: 2 287 287728)
19
Ferreira, J.C., Marques, J., Bártolo, P.J. and Alves, N. Rapid product development
of die-casting parts through virtual and rapid prototyping, in: Virtual modeling
and rapid manufacturing - advanced research in virtual and rapid prototyping,
edited by Paulo Bartolo et al., Taylor&Francis, 2005 (ISBN 0415390621)
20
Alves, N. and Bártolo, P.J. Advanced reverse design through a new biologically
based system, in: Design and nature – Comparing design in nature with science
and engineering, edited by C.A. Brebbia et al, WIT Press, 2004 (ISBN: 1-85312901-1)
21
Alves, N. and Bártolo, P.J. Architectural reverse design through a biomimetic
based computer tool, in: System-based vision for strategic and creative design,
Vol 2, edited by Franco Bontempi, Swets & Zeitlinger, 2003 (ISBN 90 5809
5991)
22
Alves, N. and Bártolo, P.J. Human vision mimicry for design, in: Innovative
developments in architecture, engineering and construction, edited by C.J.
Anumba, Millpress, 2003 (ISBN 90 5966 008 0)
23
Alves, N., Bártolo, P.J. and Ferreira, J.C. Image-based modelling for reverse
engineering of large objects, in: Rapid response to product development, edited
by S.T. Tan et al, IMechE, 2002, (ISBN 1 86058 376 8)
24
Alves, N. and Bártolo, P.J. Human vision principles supporting computer aided
design, in: Design and nature: Comparing design in nature with science and
engineering, edited by C.A. Brebbia, L. Sucharov and P. Pascolo, WIT Press,
Southampton, UK, 2002 (ISBN: 1-85312-901-1)
Papers in international journals
25
Malça, C., Gonçalves, P., Alves, N. and Mateus, A. Influence of internal
topologies on components produced by selective laser melting: numerical
analysis, International Journal of Mechanical, Aerospace, Industrial and
Mechatronics Engineering 9:1, 26-30, 2015
6
Nuno Alves Curriculum Vitae, January 2015
26
Malça, C., Alves, N. and Mateus, A. Aerodynamic analysis of a frontal deflector
for vehicles, International Journal of Mechanical, Aerospace, Industrial and
Mechatronics Engineering 9:1, 60-64, 2015
27
Pereira, R., Freitas, M.F., Tojeira, A.P., Alves, N., Almeida, H.A., Bártolo, P.J.
Computer modelling and simulation of a bioreactor for tissue engineering,
International Journal of Computer Integrated Manufacturing; 27:10, 946-959,
2014
28
Ramos C., Carreira, P., Bártolo, P.J. and Alves, N. OPTIMALMOULD: Cooling
system influence in the injection moulding cycle time optimization, Advanced
Materials Research, 683, 544-547, 2013
29
Carreira, P., Alves, N., Ramos, C. and Bartolo, P.J. Bio inspired algorithms for
injection moulding optimization, Advanced Materials Research, 683, 771-774,
2013
30
Carreira, P., Alves, N., Ramos, C. and Bartolo, P.J. Optimization of thermoplastic
pre-pregs overmoulding, Applied Mechanics and Materials, 365-366, 1007-1011,
2013
31
Mateus, A, Almeida, A. and Alves, N. Development of a novel ergonomic
evaluation tool, Journal of Biomechanics, 45, Supplement 1, S510, 2012
32
Alves, N. and Bártolo, P.J. Automatic 3D shape recovery for rapid prototyping,
Virtual and physical prototyping, 3, 123-137, 2008
33
Ferreira, J.C., Bártolo, P.J., Alves, N. and Marques, J. Virtual and rapid
prototyping for die-casting development, International journal of computer
applications in technology, 30, 176-183, 2007
34
Ferreira, J.C., Mateus, A. and Alves, N. Rapid tooling aided by reverse
engineering to manufacture EDM electrodes: International Journal of Advanced
Manufacturing Technology, 34(11), 1133-1143, 2007
35
Alves, N. and Bártolo, P.J. Virtual modelling through human vision sense,
International journal on interactive design and manufacturing, 1, 195-207, 2007
7
Nuno Alves Curriculum Vitae, January 2015
36
Alves, N. and Bártolo, P.J. Integrated computational tools for virtual and physical
automatic construction, Automation in construction, 15, 257-271, 2006
37
Ferreira, J.C., Alves, N., Bártolo, P.J. Rapid manufacturing of medical prostheses
International journal of manufacturing technology and management, 6(6), 567583, 2004
38
Alves, N., Bártolo, P.J. and Ferreira, J.C. Computer rapid design: I. accuracy
analysis, International journal of product development, 1(2), 183-202, 2004
39
Alves, N., Bártolo, P.J. and Ferreira, J.C. Computer rapid design: II. application,
International journal of product development, 1(2), 203-214, 2004
40
Ferreira, J.C. and Alves, N. Integration of reverse enginering and rapid tooling in
foundry technology, Journal of materials processing technology, 142, 374-382,
2003
41
Ferreira, J.C., Alves, N., Mateus A.J. and Custódio, P.M. Integrated product and
tooling development via reverse engineering methodologies and rapid prototyping
techniques, journal of product management & development, 1(1), 79-89, 2001
Papers in Proceedings
Proceedings edited as a book
42
Mateus, A.C., Almeida, H.A., Alves, N. Desenvolvimento de uma Ferramenta
Integrada para Avaliações Ergonómicas, 5º Congresso Nacional de Biomecânica,
Edited by R.N. Jorge et al, IDMEC, 2013 (ISBN:978-989-96276-3-5)
43
Ruben, R., Teixeira, D., Alves, N. Análise de componentes acetabulares com
abas, 5º Congresso Nacional de Biomecânica, Edited by R.N. Jorge et al, IDMEC,
2013 (ISBN:978-989-96276-3-5)
44
Ramos, C., Carreira, P., Bártolo, P. and Alves, N. Optimalmould - Part I: Multiobjective optimization to moulds design for injection of polymers, Proceedings of
the 10th International Conference of Numerical Analysis and Applied
Mathematics, Edited by T.E. Simos, The American Institute of Physics, Vol 1479,
2012 (ISBN: 978-0-7364-1091-6)
8
Nuno Alves Curriculum Vitae, January 2015
45
Ramos, C., Carreira, P., Bártolo, P. and Alves, N. Optimalmould - Part II: Global
optimization of the injection moulding cycle time, Proceedings of the 10th
International Conference of Numerical Analysis and Applied Mathematics, Edited
by T.E. Simos, The American Institute of Physics, Vol 1479, 2012 (ISBN: 978-07364-1091-6)
46
Pereira, R., Freitas, D., Tojeira, A., Almeida, H., Alves, N., Bártolo, P.J.
Computational optimization of a novel bioreactor for tissue engineering
applications, Proceedings of the 1st International Conference on Design and
Processes for Medical Devices (PROMED), Edited by E. Cerreti, 2012 (ISBN:
978 88 6608 058 9)
47
Freitas, D.M., Pereira, R.F., Tojeira, A.P., Bártolo, P.J., Alves, N. Capela, C.A.
Mendes, A.L. and Almeida, H.A. Influência das variáveis dimensionais das
câmaras de cultura de bioreactores, 4º Congresso nacional de biomecânica,
Edited by L. Roseiro et al, SPB, 2011 (ISBN 978-989-97161-0-0)
48
Frazão, J., Bártolo, P.J., Alves, N., Almeida, H., Comparação de modelos de
remodelação óssea em implantes ortopédicos, 4º Congresso Nacional de
Biomecânica, Edited by L. Roseiro et al, SPB, 2011 (ISBN 978-989-97161-0-0)
49
Alves, N., Bártolo, P.J. and Ferreira, J.M. Distortion models of digital images for
BioCAD, Computational methods in engineering, edited by C. Mota Soares et al,
APMTAC/SEMNI, 2004 (ISBN: 972 49 2008 9)
50
Ferreira, J.M, Alves, N. and Bártolo, P.J. Method for rapid scanning of physical
prototypes: visibility concept, Computational methods in engineering, edited by C.
Mota Soares et al, APMTAC/SEMNI, 2004 (ISBN: 972 49 2008 9)
51
Alves, N. and Bártolo, P.J. Biological inspiration for CAAD, Proceedings of 4th
International postgraduate research conference in the built and human
environment, edited by L. Ruddock et al, Salford University, 2004 (ISBN: 0
90289663 6)
52
Alves, N., Bártolo, P.J. and Ferreira, J.C. Distortion analysis of digital images for
BioCAD, Advanced research in virtual and rapid prototyping, edited by P.J.
9
Nuno Alves Curriculum Vitae, January 2015
Bártolo et al, School of Technology and Management, Portugal, 2003 (ISBN: 972
99023 05)
53
Alves, N., Bártolo, P.J. and Ferreira, J.C. The use of BioCAD and rapid
prototyping for building restoration, Advanced research in virtual and rapid
prototyping, edited by P.J. Bártolo et al, School of Technology and Management,
Portugal, 2003 (ISBN: 972 99023 05)
54
Ferreira, J.C., Alves, N., Bártolo, P.J., Cardoso, A. and Lopes, J. Reverse
engineering for rapid generation of medical prostheses, Advanced research in
virtual and rapid prototyping, edited by P.J. Bártolo et al, School of Technology
and Management, Portugal, 2003 (ISBN: 972 99023 05)
55
Ferreira, J.C., Alves, N., Bártolo, P.J., Gouveia, D. and Janeiro, J. Computed
tomography for reverse engineering of anatomic models, Advanced research in
virtual and rapid prototyping, edited by P.J. Bártolo et al, School of Technology
and Management, Portugal, 2003 (ISBN: 972 99023 05)
56
Alves, N. and Bártolo, P.J. Biologically based CAD tools, COBRA 2003,
Proceedings of the RICS Foundation construction and building research
conference, edited by David Proverbs, RICS, 2003 (ISBN: 1 84219 148 9)
57
Ferreira, J.C., Bártolo, P.J. and Alves, N. Computational solid mechanichs
integrated with reverse engineering for rapid manufacturing of automotive
prototypes, Proceedings of the VII national meeting on computational mechanics,
University of Évora, Portugal, Vol. IV, 2003 (ISBN: 972 778 058 X)
58
Ferreira, J.C., Bártolo, P.J. and Alves, N. Method to integrate reverse engineering
with computational solid mechanics for rapid manufacturing of medical
prototypes, Proceedings of the VII national meeting on computational mechanics,
University of Évora, Portugal, Vol. IV, 2003 (ISBN: 972 778 058 X)
59
Alves, N., and Bártolo, P.J. Reversing design through computer vision, ARCOM
2002, Proceedings of the eighteenth annual conference, ARCOM, 2002 (ISBN: 0
9534161 7 8)
60
Ferreira, J.C., Bártolo, P.J., Alves, N., Ventura, B. and Ferreira, N.F. Reverse
engineering for rapid prototyping of automotive components, 47 International
10
Nuno Alves Curriculum Vitae, January 2015
wissenschaftliches kolloqium, Technishe Universitat Illmenau, Germany, 2002
(ISSN: 1619 4098)
61
Ferreira, J.C., Bártolo, P.J. and Alves, N. Development of an efficient method to
integrate reverse engineering with rapid prototyping for medical implants", 47
International wissenschaftliches kolloqium, Technishe Universitat Illmenau,
Germany, 2002 (ISSN: 1619 4098)
62
Alves, N. and Bártolo, P.J. Human-based computer vision system for architectural
design, Housing construction - An interdisciplinary task, Vol. 1, edited by Oktay
Ural et al, Wide Dreams, Portugal, 2002 (ISBN: 972 9027 31 5)
63
Alves, N. and Bártolo, P.J. A new image-based modeling system to support
architectural
redesign
activities, Proceedings
of
the 2nd
International
postgraduate research conference in the built and human environment, edited by
M. Sun et al, Salford University, 2002 (ISBN: 1 900491 70 2)
Other Proceedings
64
Ruben, R., Teixeira, D., Alves, N. Customized triflange acetabular cup analysis,
ECCOMAS 2012 European Congress on Computational Methods in Applied
Sciences and Engineering, Vienna, Austria, 2012.
65
Pinto, E., Ferreira, C., Oliveira, L., Domingos, M., Alves, N., Almeida, H. and
Bártolo, P. Micro-stéréo-thermo-lithographie: un nouveau concept de photofabrication additive, Assises européennes du prototypage rapide, Paris, France,
2011
66
Carreira, C., Sousa, C., Gaspar, J., Bártolo, P.J., Alves, N., Almeida, H.A.,
Capela, C., Frazão, J. Bone remodelling formulations to aid dental implant
applications, 18th Annual symposium on computational methods in orthopaedic
biomechanics, New Orleans, USA, 2010
67
Frazão, J., Alves, N., Almeida, H., Bártolo, P.J. Study on the application of two
bone remodelling models, V International Congress on Biomaterials, BIOMAT
2010, Habana, Cuba, 2010
11
Nuno Alves Curriculum Vitae, January 2015
68
Tojeira, A.P., Freitas, D.M., Pereira, R.F., Bártolo, P.J., Alves, N., Capela, C.,
Mendes, A., Almeida, H.A. Computational analysis of bioreactor chamber for
tissue engineering applications, Rapid product development, Marinha Grande,
Portugal, 2010
69
Carreira, C., Sousa, C.B., Gaspar, J., Bártolo, P.J., Alves, N., Mendes, A.,
Almeida, H. and Vaz, D. Mechanical behaviour of implants for different jaw
regions, Engineering 2009, University of Beira Interior, Covilhã, Portugal, 2009
70
Almeida, F.,Bártolo, P.J., Alves, N., Almeida, H.A., León, N.P., Zollokofer, C.,
Pierson, B., Serra, P., Duarte, C., Trinkaus, E. and Zilhão, J. The Lapedo child
reborn: contributions of rapid prototyping for an upper paleolithic infant burial
and face reconstruction, The 8th International symposium on virtual reality,
archeology and cultural heritage, Brighton, UK, 2007
71
Alves, N. and Bártolo, P.J. Advanced reverse engineering, 11th European forum
on rapid prototyping, Paris, France, 2005
72
Jardini, A.L., Maciel Filho, R., Bartolo, P.J., and Alves, N. Rapid prototyping
scaffold design for tissue engineering, Congresso latino americano de
biomateriais, Campinas, Brazil, 2004
73
Alves, N. and Bártolo, P.J. Análise de distorções de imagens digitais para
reconstrução automática 3D, 3rd Conferencia iberoamericana en sistemas,
cibernética e informática, Orlando, USA, 2004
74
Alves, N., Gomes, J.P., Carvalho H.H., Bártolo, P.J. and Jardini, A.L. Geração e
correcção automática de modelos STL em engenharia inversa, 3rd Conferencia
iberoamericana en sistemas, cibernética e informática, Orlando, USA, 2004
75
Alves, N. and Bártolo, P.J. Bio-CAD, Biomimetics 8, University of Reading, UK,
2003
76
Alves, N. and Bártolo, P.J. Computer aided reverse engineering through
computer vision techniques, International conference RPD-2002, Rapid product
development, Marinha Grande, Portugal, 2002
12
Nuno Alves Curriculum Vitae, January 2015
77
Alves, N. and Bártolo, P.J. Biomimetic principles applied to reverse engineering,
1st Polytechnic conference on mechanical engineering, Portugal, 2001
78
Ferreira, J.C., Alves, N. and Mateus, A.J. 3D digitising for reverse engineering to
manufacture rapid tooling, Proceedings of 10th European conference on rapid
prototyping and manufacturing, Paris, France, 2001
79
Custódio, P.M, Alves, N. and Mateus, A.J. Integration of new methods applied to
the tools reconstruction, Actas do 2º encontro nacional do colégio de engenharia
mecânica, Coimbra, Portugal, 2000
Papers in national periodicals
80
Ramos, C., Alves, N., Carreira, P. and Bártolo, P. Optimalmould: plataforma de
otimização aplicada à moldação por injeção, O Molde, 94, 39, 2012
81
Freitas, D., Vieira, A., Sousa, J., Figueiredo, F., Belbut, M., Bártolo, P.J., Alves,
N., Almeida, H.A., Capela, C., Gago, P. Célula de gestão integrada de
maquinação – electroerosão, O Molde, 89, 18, 2011
82
Silva, C. Domingues, F., Bártolo, P.J., Alves, N., Almeida, H.A. Reconstrução e
controlo dimensional de formas 3D através de luz branca estruturada, O Molde,
88, 30, 2011
83
Paulo, V., Capela, C., Alves, N and Camãno, P., Development and manufacture of
injection mould for determination of extraction forces, O Molde, 24, 2010
84
Bártolo, P.J., Alves, N., Almeida, H., Silva, C., Cunha, V. Reverse engineering:
3D aquisition through CMM, O Molde, 80, 36, 2008
85
Ferreira, J.C., Alves, N., Bártolo, P.J., Cardoso, A., Lopes, P. Rapid
manufacturing
of
medical
prostheses
from
reverse
engineering,
Ciência&tecnologia dos materiais, 18(3), 2006
86
Alves, N. and Bártolo, P.J. Reverse engineering: 3D shape acquisition by coded
structured light, O Molde, No. 66, 16, 2005
87
Bártolo, P.J., Alves, N., Mateus, A., Merino, A. and Rodriguez, G. Advanced
production techniques: integration between reverse engineering and rapid
prototyping, O Molde, No. 58, 25, 2003
13
Nuno Alves Curriculum Vitae, January 2015
Patents
88
D.M. Freitas, A.P. Tojeira, R.F. Pereira, P.J. Bártolo, N.M. Alves, A.L. Mendes,
C.A. Capela, H.A. Almeida, Bioreactor Multifuncional para a Engenharia de
Tecidos, Portuguese Patent Nº 105176, 21/03/2013
89
C.S. Moura, C. Bastos, C. Videira, R. Bento, P.J. Bártolo, N.M. Alves, C. Capela,
A. Mendes, H.A. Almeida, V. Mouta, Caixa com sistema integrado e motorizado,
para tratamento de diabéticos, e respectivo processo, Portuguese Utility Model
Nº 10782, 29/01/2013
90
Freitas, D., Pereira, R., Ferreira, J., Bártolo, P., Rodrigues, S., Alves, N., Capela,
C. Sistema doméstico de recolha de óleos alimentares usados, Portuguese Patent
Nº 105177, 13/04/2012
91
Costa, A., Santos, C., Bártolo, P.J., Alves, N., Capela, C., Mendes, A. Grade
lateral para cama com tabuleiro multifunção, Portuguese Utility Model Nº 10716,
17/02/2012
92
Viana, T., Biscaia, S., Ferreira, J., Mendes, A., Sousa, J. Almeida, H.A., Capela,
C., Alves, N.M., Bártolo, P.J. Alteador sanitário eléctrico, Portuguese Utility
Model Nº 10716, 16/04/2012
93
Gaspar, M., Santos, D., Bártolo, P.J., Alves, N., Mendes, A., Capela, A., Mateus,
A., Santos, C. Recipiente biodegradável e fertilizante para germinação de
plantas, Portuguese Patent Nº 10717, 2012
94
Mota, C.M., Mateus, A., Bártolo, P.J., Almeida, H., Ferreira, N, Domingos, M.,
Alves, N. Processo e equipamento de fabrico rápido por bioextrusão, Portuguese
Patent Nº 104247, 2010
77
Mouta, R., Alves, N. and Almeida, H. Conjunto de cinco peças para sistema de
alimentação e respective processo para a sua utilização, Portuguese Patent Nº
104349, 2010
78
Bento, S., Bispo, M., Bártolo, P., Alves, N., Capela, C. and Mendes, A. Tijolo
compósito de argila e limalha metálica, Portuguese Patent Nº 104571, 2011
14
Nuno Alves Curriculum Vitae, January 2015
Funded research projects
Current projects
1
Skelgen – Establishment of a cross continente consortium for enhancing
regenerative medicine in skeletal tissues. Funding agency: Marie Curie Action,
International Research Staff Exchange Scheme (IRSES)
2
Hydrozone – Bioactivated hierarchical hydrogels as zonal implants for articular
regeneration. Funding agency: European Commission, FP7-NMP-2012-Large 6,
NMP.2012.2.2-1. Funding: 9 300 000 Euros
3
GradSint - Multi-material laser sintering for the production of Functional Graded
Structures
(EXCL/EMS-TEC/0460/2012).
Funding
agency:
Portuguese
Foundation for Science and Technology; Funding: 450 000 Euros
4
Strategic Project UI 4044 (Pest-OE/EME/UI4044/2011). Funding agency:
Portuguese Foundation for Science and Technology; Funding: 157 576 Euros
Past projects
5
OptimalMould – Optimal design of injection mould tools (PTDC/EMEPME/
108188/2008). Funding agency: Portuguese Foundation for Science and
Technology; Funding: 64 000 Euros; Role: Principal Investigator
6
Multimaterial
microstereo-thermal-lithography
(µSTLG)
(PTDC/EMEPME/
098037/2008). Funding agency: Portuguese Foundantion for Science and
Technology; Funding: 176 297 Euros
7
RapidPRE-Rapid prototyping by reactive extrusion: A new concept for rapid
manufacturing process
(PTDC/EME-TME/104178/2008). Funding agency:
Portuguese Foundation for Science and Technology; Funding: 130 000 Euros
8
Bio Fab Toolbox (PTDC/EME-CRO/120585/2010). Funding agency: Portuguese
Foundation for Science and Technology; Funding: 50 000 Euros
15
Nuno Alves Curriculum Vitae, January 2015
9
Biomas II - Bioadditive manufacturing & engineering of heterogeneous 3D
structures. Funding agency: Portuguese Agency for Innovation. Funding: 877
486.22 Euros
10
International Research Exchange for Biomedical Devices, Design and
Prototyping. Funding agency: European Commission; Funding: 745 200 Euros
11
ToolingEdge. Funding agency: Portuguese Agency for Innovation; Funding: 8
380 162.87 Euros
12
Bigproto – Advanced Techniques to Produce Large Prototypes. Funding agency:
Portuguese Agency for Innovation; Funding: 2 229 458 Euros; Role: member of
the research team
13
Calrod – Calibration system to measure the alignment of automotive
wheals.Funding agency: Portuguese Agency for Innovation; Funding: 1 331 606
Euros
14
iCAD – Integrated platform of emergent technologies applied to the mouldmaking
industry. Funding agency: Portuguese Agency for Innovation; Funding: 667 116
Euros
15
Tyre+ – Tyre recycling for advanced hybrid moulding of plastic components.
Funding agency: Portuguese Agency for Innovation; Funding: 656 586 Euros
16
Frutus. Funding agency: Portuguese Agency for Innovation; Funding: 112 048
Euros
17
Sample sizes for interchangeable production of reverse engineered parts
(PTDC/EME-PME/73357/2006). Funding agency: Portuguese Foundation for
Science and Technology; Funding: 70 000 Euros
18
QUICK-QUOTE – Software for advanced quotation of plastic injection moulds.
Funding agency: Portuguese Agency for Innovation; Funding: 532 928 Euros
19
Iberoamerican network on “Biomanufacturing: materials, processes and
computer simulation (BIOFAB). Funding agency: CYTED; Funding: 105 000
Euros
16
Nuno Alves Curriculum Vitae, January 2015
20
Cast products and mould designer skills at the european context. Funding agency:
European Commission; Funding: 477 002 Euros
21
AUTOCONFORT. Funding agency: Portuguese Agency for Innovation; Funding:
168 920 Euros
22
Micro rapid prototyping (POCTI/EME/58405/2004). Funding agency: Portuguese
Foundation for Science and Technology; Funding: 75 000 Euros
23
Rapid prototyping by 3D printing to develop tools and medical prostheses
(POCTI/EME/60650/2004). Funding agency: Portuguese Foundation for Science
and Technology; Funding: 52 000 Euros
24
Physical replication of the Lapedo’s child skeleton. Funding agency: Leiria Town
Council; Funding: 4 023 Euros
25
directINSPECT. Funding agency: ITVM (industrial funding). Funding: 39 360
Euros
26
LCP – Reverse engineering: low cost scanning system. Funding agency:
DISTRIM2 (industrial funding). Funding: 40 500 Euros
Invited presentations
1
Optimization of permanent implants, CENPRA – Renato Archer Centre,
Campinas, Brazil, September 17, 2009
2
Influences of the BIOFAB network on Mechanical engineering programme at the
School of Technology and Management, Polytechnic Institute of Leiria, Leiria,
Portugal, March 11, 2008
3
Design and rapid manufacturing, CINTEC congress - Mechanics and automation,
Instituto Superior Tupy, Joinville, Brazil, September 11-14, 2007
4
RP activities in portugal, Rapid prototyping and manufacturing conference, St.
Charles, Illinois, USA, May 23-25, 2006
5
Advanced RE techniques for product development, Workshop on reverse
engineering held within 2nd International conference on advanced research in
17
Nuno Alves Curriculum Vitae, January 2015
virtual and rapid prototyping, School of Technology and Management,
Polytechnic Institute of Leiria, Portugal, from September 28 to October 1, 2005,
6
New computational technologies to support design, New interfaces congress,
IADE, Lisbon, Portugal, July, 2001
Conference organizations and Member of Committees
1
Chairman and organiser of the symposium on integrated computational tools for
advanced manufacturing, held within 10th International conference of numerical
analysis and applied mathematics (ICNAAM 2012), Kos, Greece, September 1925, 2012
2
Member of the organizing committee: 5th International conference on advanced
research in virtual and physical prototyping (VRAP2011), Leiria, Portugal,
September 8 to October 1, 2011
3
Conference Co-Chairman and member of the organizing committee: 1st
International conference on sustainable intelligent manufacturing (SIM2011),
Leiria, Portugal, June 28 to July 1, 2011
4
Member of the organizing committee: 4th International conference on advanced
research in virtual and physical prototyping (VRAP2009), Leiria, Portugal,
October 6-10, 2009
5
Member of the organizing committee of the 1st ECOMAS Thematic conference on
tissue engineering, Leiria, Portugal, July 9-11, 2009
6
Member of the organizing committee: 3rd International conference on advanced
research in virtual and physical prototyping (VRAP2007), Leiria, Portugal,
September 24-29, 2007
7
Member of the organizing committee: 2nd International conference on advanced
research in virtual and physical prototyping (VRAP2005), Leiria, Portugal,
September 28 to October 1, 2005
International course organizations
18
Nuno Alves Curriculum Vitae, January 2015
1
Design and fabrication of implants for medical applications”, School of
Technology and Management, Leiria, Portugal, December 18-19, 2008
2
Reverse engineering, National University of La Plata, La Plata, Argentina,
October 21-24, 2008
Session chair
1
ECCOMAS International conference on tissue engineering, Leiria, Portugal,
Session Chair: Computer-aided tissue engineering, July 10, 2009
2
International conference on rapid product development (RPD-2008), Designing
the industry of the future, Oliveira de Azeméis, Portugal, Session Chair: Product
Development, October 30, 2008
3
International conference - Global markets in dynamic environments: making
positive connections through strategy, technology and knowledge, GBATA Global Business and Technology Association, Leiria, Portugal, Session Chair:
Information Technology, July 14, 2005
Students supervision
PhD Students
1
Elodie Maria Pinto (ongoing). Co-Advisor
2
Pedro Carreira (ongoing). Advisor
MSc Students
1
Nelson de Jesus Silvério da Silva, MSc. (graduated: 2011). Advisor
2
Flávio André Carvalho Domingues, MSc. (graduated: 2011). Advisor
3
Edgar David Magalhães Rodrigues, MSc. (graduated: 2011). Advisor
4
Joana Filipa Pereira Gaspar, MSc. (graduated: 2011). Co-Advisor
5
Diogo Henriques Teixeira, MSc. (graduated: 2011). Co-Advisor
6
Domingos dos Santos Andrade, , MSc. (graduated: 2011). Advisor
7
Catarina Sofia Gaspar da Silva, MSc. (graduated: 2011). Co-Advisor
8
Ana Catarina Bernardes Ferreira Mateus, MSc. (graduated: 2012). Advisor
9
Carlos Manuel Guerra Granjeiro, MSc. (graduated: 2012). Advisor
10
Tiago dos Santos Cardeira, MSc. (graduated: 2012). Advisor
11
Carlos Manuel Dias, MSc. (graduated: 2011). Co-Advisor
19
Nuno Alves Curriculum Vitae, January 2015
12
Carina Faria Carreira, MSc. (graduated: 2012). Advisor
13
Cátia Alexandra Bento Sousa, MSc. (graduated: 2012). Advisor
14
Filipa Rodrigues dos Santos, MSc. (graduated: 2012). Advisor
15
Hugo Alexandre Murraças Quinzico, MSc. (graduated: 2012). Advisor
16
Hugo Emanuel Domingues de Sousa, MSc. (graduated: 2012). Advisor
17
Susana Carina Sousa Bento, MSc. (graduated: 2012). Advisor
18
Marco José Alves Mendes Bispo, MSc. (graduated: 2012). Advisor
19
Marina Ferreira Matias, MSc. (graduated: 2012). Advisor
20
Pedro António Gomes Luis, MSc. (graduated: 2012). Advisor
21
Marina Ferreira Matias, MSc. (graduated: 2012). Advisor
22
Vanessa Daniela da Cruz Pirraça, MSc. (graduated: 2012). Advisor
23
Rogério Manuel Ferreira Martins, MSc. (graduated: 2012). Co-Advisor
24
Cláudio Rodrigo Pereira Ferreira, MSc. (graduated: 2012). Co-Advisor
Filipe Passagem Góis, MSc. (graduated: 2012). Co-Advisor
Technical reviewer activities
Invited reviewer of the following journals
1
Assembly Automation
2
Bioinspiration & Biomimetics
3
Virtual & physical prototyping
4
vehicle design
Invited reviewer of the following intenational conferences
1
ASME Conference – Biennial conference on engineering system and design
analysis
2
ANZSYS Conferences
3
SETE Conferences - Systems engineering test and evaluation
4
Conferência Ibero-americana em Sistemas, Cibernética e Informática (CISCI)
Centre for Rapid and Sustainable Product Development
20
Nuno Alves Curriculum Vitae, January 2015
The Centre for Rapid and Sustainable Product Development (CDRSP) is a Research
Centre hosted by the Polytechnic Institute of Leiria. Its stated mission is to contribute to
the advancement of science and technology leading to more suitable, effective and
efficient products, materials and processes, aiming at generating added-value for the
industry, as well promoting awareness in society of the role and importance of rapid and
sustainable product development. To fulfill this mission the Centre carries out
technological research, providing consulting, training and research services in the
strategic areas of rapid and sustainable product development.
CDRSP, established in May 2007, is supported by the Portuguese Foundation for
Science and Technology. In the field of Mechanical Engineering.
21