joséxavier
Personal data
Full name
Work address1
T
u
k
URL
Work address2
T
u
k
ORCID
ResearcherID
Scopus ID
Google Scholar
José Manuel Cardoso Xavier
University of Trás-os-Montes e Alto Douro (UTAD) m
Science and Technology School (ECT)
Centre for the Research and Technology of Agro-Environmental & Biological Sciences
(CITAB) m
Quinta de Prados, 5000-801 Vila Real, Portugal
+351 259 350 306
+351 259 350 356
[email protected]
http://home.utad.pt/~jmcx/
Institute of Mechanical Engineering and Industrial Management (INEGI) m
Optics and Experimental Mechanics Laboratory (LOME)
Campus da FEUP, Rua Dr. Roberto Frias, 400, 4200-465 Porto, Portugal
+351 225 082 150
+351 225 081 584
[email protected]
0000-0002-7836-4598 m
A-4348-2013 m
16317714700 m
m
Curriculum vitæ of J. Xavier
z
July 16, 2015
1/29
Academic degrees
11.2007
Ph.D., Characterisation of the wood stiffness variability within the stem by the virtual
fields method: Application to P. pinaster in the LR plane, Arts et Métiers ParisTech,
Châlons-en-Champagne, France, November 27, 2007.
(FCT: SFRH/BD/11324/2002)
10.2003
7.1999
M.Sc., Characterisation of the shear behaviour of wood using the Iosipescu test, University of Trás-os-Montes e Alto Douro, October 9, 2003.
B.Sc., Mechanical Engineering, University of Trás-os-Montes e Alto Douro, July 27
1999. (Merit award from Fundação Engenheiro António de Almeida)
Current status and previous activities
Current position
present
02.2015
Invited lecturer (Professor Auxiliar Convidado a Tempo Integral ) (PT).
Universidade de Trás-os-Montes e Alto Douro (UTAD) | Escola de Ciéncia e Tecnologia (ECT)
| Departamento de Engenharias | Área disciplinar de Eng. Mecânica - Mecânica aplicada.
Previous activities
02.2015
04.2014
3.2014
7.2009
Post-Doc Research Assistant (PT).
Institute of Mechanical Engineering and Industrial Management (INEGI) m | Optics and
Experimental Mechanics Laboratory (LOME) | Porto University Biomechanics Laboratory
(LABIOMEP) m Program RES2IN: RT1 Biomechanics contributions to healthcare.
Post-Doc Research Assistant, Centre for the Research and Technology of AgroEnvironment and Biological Sciences (CITAB/UTAD) m.
Program Ciência2008 supported by the European Science Foundation and MCTES - through
the POPH-QREN - Typology 4.2. Contract
6.2009
1.2008
Researcher fellowship at INEGI/UP (PT).
Research project: “Experimental assessment of moisture effects on aging durability of thermosetting polymers” (FTC: PTDC/EME-PME/67791/2006)
11.2007
11.2003
PhD candidate at Arts et Métiers ParisTech (FR).
10.2003
9.1999
Invited assistant lecturer and MSc candidate at UTAD (PT).
Ph.D. student at LMPF/ENSAM Châlons-en-Champagne; collaboration in the teaching service
at ENSAM Châlons-en-Champagne
Invited as a guest assistant lecturer at the Engineering Department of UTAD; M.Sc. student
at UTAD; holder of a scholarship in the research project: “Non-linear mechanical behaviour of
wood” (FCT: POCTI/36270/EME/2000);
Participation in projects
Research projects
2015–2019
2014–2015
Innovative photomechanical approaches in identification of the dynamic mechanical behaviour of materials m, University of Southampton (UK), Role:Investigator,
Financial support by EPSRC Fellowship EP/L026910/1.
Definição de critérios para a determinação da fadiga de um militar em contextos
de emprego climáticos diversos, Institute of Mechanical Engineering and Industrial
Management (INEGI/UP), Role:Investigator, Financial support by Ministério da defesa
nacional (ESE-INEGI-FEUP-LABIOMEP-CPAE).
Curriculum vitæ of J. Xavier
z
July 16, 2015
2/29
2014–2015
2012-2013
2012–2015
2012–2015
2013
2011-2012
2011–2014
2011–1012
2009–2012
2008–2009
2001–2003
Stabilo Twin Arch Shoes (STAR Shoes), Institute of Mechanical Engineering and
Industrial Management (INEGI/UP), Role:Investigator, Financial support by ROPAR
QREN 38415.
Methods for the characterization of the translaminar fracture toughness of
polymer composites, Instituto de Engenharia Mecânica e Gestão Industrial (INEGI/UP), Role:Investigator, Financial support by Daimler AG (Contract: Daimler PO
1059203795).
2genComp – second generation Composites, Instituto de Engenharia Mecânica e
Gestão Industrial (INEGI/UP), Role:Investigator, Financial support by Airbus Industries
(Contract: Airbus PO 8202919946).
Fracture behaviour of cortical bone under mixed-mode I+II loading, Instituto
de Engenharia Mecânica e Gestão Industrial (INEGI/UP), Role:Investigator (20%), Financial support by Portuguese Foundation for Science and Technology (PTDC/EMEPME/119093/2010).
High strain rate characterization of polymer composites - Project II, Instituto
de Engenharia Mecânica e Gestão Industrial (INEGI/UP), Role:Investigator, Financial
support by Aernnova Company (Contract: UMEC-AERN-2012-11-24).
High strain rate effects on textile and unidirectional composites, Instituto de Engenharia Mecânica e Gestão Industrial (INEGI/UP), Role:Investigator, Financial support
by Aernnova Company (Contract: AESI/11-052).
Numerical and experimental study of cohesive laws in bonded wood joints,
University of Trás-os-Montes e Alto Douro (UTAD), Role:Investigator (20%), Financial support by Portuguese Foundation for Science and Technology (PTDC/EMEPME/114443/2009).
PromoAgro – Promotion of Agro-food Competitiveness, University of Trás-osMontes e Alto Douro (UTAD), Role:Investigator, Financial support by CCDRN - ON.2
(Strategic Project–UI 4033–2011-2012. PEst-C/AGR/UI4033/2011).
iComp- integrated method for structural design of Composite components, Institute of Mechanical Engineering and Industrial Management, Role:Investigator, Financial
support by Airbus Industries (Contract: Airbus PO 2311292).
Experimental assessment of moisture effects on aging and durability of thermosetting polymers, Institute of Mechanical Engineering and Industrial Management (INEGI/UP), Role:scientific research scholarship-holder, Financial support by Portuguese Foundation for Science and Technology (PTDC/EME-PME/67791/2006).
Non-linear mechanical behaviour of wood, University of Trás-os-Montes e Alto
Douro (UTAD), Role:Scientific research scholarship-holder, Financial support by Portuguese Foundation for Science and Technology (POCTI/36270/EME/2000).
Teaching experience
Arts et Métiers ParisTech, Châlons-en-Champagne, France m.
(Contrat d’enseigment vacataire)
2006–2007
Mécanique des solides déformables (3): Introduction à la méthode des eléments finis (TP).
2005–2006
Mécanique du solide (TP).
2004–2005
2nd Semester: Mécanique (TP).
Curriculum vitæ of J. Xavier
z
July 16, 2015
3/29
UTAD, Vila Real, Portugal m.
(Professor auxiliar convidado a tempo integral)
2014-2015
2st Semester:
1st cycle: Mecânica das Estruturas [T(1,2)+TP(1,2)+O(1,2)](Mechanical Engineering, 3rd
year); Desenho de Engenharia II [T(1,2,3)](Mechanical Engineering and Energy Engineering,
1st year).
2nd cycle: Projeto de Estruturas I (T1+TP1+O1)(Mechanical Engineering, 1st year); Siminário II (Mechanical Engineering, 1st year); Projeto de Sistemas Térmicos II (O1) (Mechanical
Engineering, 1st year).
(Colaborador no serviço docente - Ciência 2008)
2008-present
Invited to collaborate in lecturing at mechanical and energy engineering courses: 1st cycle –
Seminário I, IV, V ; 2nd cycle – Seminário I, II, Projecto de Sistemas Térmicos I (O1).
(Colaborador no serviço docente - trabalhador independente)
2002-2003
1st Semester: Mecânica das Estruturas (T+TP)(Mechanical Engineering).
2nd Semester: Tecnologia Mecânica II (TP)(Mechanical Engineering).
2001-2002
1st Semester: Análise de Custos Industriais (TP)(Electrical Engineering).
2nd Semester: Análise de Custos Industriais (TP)(Electrical Engineering).
2000-2001
1st Semester: Desenho de Construções Mecânicas (T+TP)(Mechanical Engineering); Análise
de Custos Industriais (TP)(Electrical Engineering).
2nd Semester: Tecnologia Mecânica II (TP)(Mechanical Engineering).
1999-2000
1st Semester: Mecânica Aplicada II (TP)(Mechanical Engineering); Análise de Custos Industriais
(TP)(Electrical Engineering).
T - Aula Teórica; TP - Aula Teórico-Prática; O – Outras.
Supervising experience
Ph.D. theses
Supervision
2013
João Luís Pereira. Assessing wood quality by spatial variability of transverse elastic
properties within the stem: Case study on P. pinaster at the meso scale. University of
Beira Interior, Covilhã, Portugal. Supervision: José Xavier, José Lousada, Abílio Silva
(UBI). (SFRH/PROTEC/50149/2009), University of Beira Interior, Covilhã, 17 June
2013.
Co-supervision
(in progress)
(in progress)
Pedro Miguel Gomes Fernandes. Estudo da durabilidade da ligação entre o betão e
laminados de CFRP de acordo com a técnica NSM. University of Minho, Guimarães,
Portugal. Supervision: José Sena-Cruz, José Xavier. (SFRH/BD/80338/2011)
Filipe Alexandre Loureiro Pagaimo. Estudo de caracterização da artroplastia cervical
– características bimecânicas in vivo. Instituto Superior Técnico, Lisbon, Portugal.
Supervision: Paulo Rui Alves Fernandes (IST), José Xavier (INEGI/LABIOMEP), Óscar
Luis Alves (Hosp. Lusíadas Porto/CHGE).
M.Sc. dissertations (post-Bologna)
Curriculum vitæ of J. Xavier
z
July 16, 2015
4/29
Supervision
2015
2014
2014
2013
2012
Vítor Hugo Moura. Caracterização do comportamento elástico da madeira no plano
transversal através de métodos inversos. University of Trás-os-Montes e Alto Douro,
Vila Real. Supervision: José Xavier, João Luís Pereira (IPV).
Wilson Tiago Henriques da Cruz. Identificação de propriedades elásticas da madeira
através de um ensaio de flexão de placa. University of Trás-os-Montes e Alto Douro,
Vila Real. Supervision: José Xavier, José Morais.
Diogo Almeida Mesquita. Identificação do compotamento ao corte do tecido ósseo
cortical usando correlação digital de imagem. University of Trás-os-Montes e Alto
Douro, Vila Real. Supervision: José Xavier, José Morais.
Joaquim Diogo da Silva Pinto de Moura. Caracterização de propriedades elásticas de
painéis MDF através do método das grelhas. University of Trás-os-Montes e Alto Douro,
Vila Real. Supervision: José Xavier, José Morais.
Alfredo José Gonçalves Ribeiro. Caracterização de parâmetros de fractura de um epóxido
usando correlação digital de imagem. University of Trás-os-Montes e Alto Douro, Vila
Real. Supervision: José Xavier, José Morais.
Co-supervision
2014
2014
2013
2013
2013
2013
2012
2010
Bruno Filipe Borges de Carvalho. Caracterização numérica e experimental de ligações
aparafusadas de madeira. Master thesis in Mechanical Engineering, University of Trásos-Montes e Alto Douro, Vila Real. Supervision: Nuno Dourado, José Xavier.
Joana Margarida dos Santos Lopes. Estudo sobre as ligações em Estruturas de Madeira
do passado para o futuro: caso de estudo Casa da Quinta da Tranqueira. University of
Trás-os-Montes e Alto Douro, Vila Real. Supervision: Eunice Salavessa, José Xavier.
Pedro Miguel Fernandes Monteiro. Caracterização da madeira de Pinus pinaster à
fratura em modo I à escala dos anéis de crescimento. University of Trás-os-Montes e
Alto Douro, Vila Real. Supervision: José Morais, José Xavier.
Nastaran Malek. Determining radial and tangential shrinkage coefficients of wood by
standard and digital image correlation methods. University of Minho, Guimarães. Supervision: Jorge Branco, José Xavier.
Francisco Fernandes Luiz. Fratura do tecido ósseo cortical de bovino jovem em modo
misto para o ensaio SLB. University of Trás-os-Montes e Alto Douro, Vila Real. Supervision: Nuno Dourado, José Xavier.
António José Oliveira Meireles. Efeito de escala em provetes de geometria TDCB:
Comportamento da Curva-R e análise assimptótica. University of Trás-os-Montes e
Alto Douro, Vila Real. Supervision: Nuno Dourado, José Xavier.
Bruno José Alves Diaquino. Identificação das propriedades elásticas do tecido ósseo
cortical usando o ensaio de Arcan. University of Trás-os-Montes e Alto Douro, Vila
Real. Supervision: José Morais, José Xavier.
João Paulo Neto Martins. Bases para o projecto de conservação, restauro e reabilitação
de edifícios antigos: estudos sobre Quinta do Concelho de Guimarães. University of
Trás-os-Montes e Alto Douro, Vila Real. Supervision: Eunice Salavessa, José Xavier.
Curriculum vitæ of J. Xavier
z
July 16, 2015
5/29
2009
José Luis Vilaverde Queiroz. Estudo do envelhecimento físico de um polímero estrutural.
University of Trás-os-Montes e Alto Douro, Vila Real. Supervision: José Morais, José
Xavier.
Arguing member of the jury of M.Sc. and Ph.D. thesis
Ph.D.
2015
2013
2011
2011
Almudena Majano-Majano. Madera termotratada de frondosa para uso estructural.
Madrid Polytechnic University (UPM), Madrid, Spain. Supervision: Jose FernandezCabo.
José Luís Pereira. Assessing wood quality by spatial variability of transverse elastic
properties within the stem: Case study on P. pinaster at the meso scale. University of
Beira Interior, Covilhã, Portugal. Supervision: José Xavier, José Lousada, Abílio Silva.
Loane Bigorgne. Mécanique et mécanismes de rupture dans le plan transverse du bois
résineux. INSA de Lyon, France. Supervision: Hubert Maigre, Michel Brunet (INSA de
Lyon, FR).
António Manuel Ribeiro de Sousa. Measurement of displacement fields based on digital image correlation and differential techniques. University of Trás-os-Montes e Alto
Douro, Vila Real. Supervision: Mário Vaz (FEUP), Vítor Filipe (UTAD).
M.Sc.
2014
2014
2014
2013
2012
2012
Mónica Filomena Castro Ferreira. Estudo do envelhecimento térmico de um epóxido
por técnicas de aniquilação de positrões e ensaios mecânicos. Mestrado em Engenharia Mecânica. Universidade de Trás-os-Montes e Alto Douro, Vila Real, Portugal.
Supervision: Marco Naia; José Morais.
Sara Catarina Pereira Gonçalves. Avaliação ergonómica e de lesões músculo-esqueléticas
dos técnicos de ambulância de emergência. Mestrado em Engenharia de Segurança e
Higiene Ocupacionais. FEUP, Universidade do Porto, Porto, Portugal. Supervision:
Mário Augusto Pires Vaz, Maria Eugénia Ribeiro de Castro Pinho.
Tiago Soares Pinheiro. Acidentes de trabalho na pesca local: zona de póvoa de varzim
e vila do conde. Mestrado em Engenharia de Segurança e Higiene Ocupacionais. FEUP,
Universidade do Porto, Porto, Portugal. Supervision: João Manuel Abreu dos Santos
Baptista.
Dinis Passos de Sousa. Reabilitação de uma casa do século XIX, de felgueiras: caracterização, diagnóstico das anomalias cosntrutivas e bases para o projecto de restauro
e reabilitação. Mestrado em Engenharia Civil. Universidade de Trás-os-Montes e Alto
Douro, Vila Real, Portugal. Supervision: Eunice Salavessa, José Correia.
Rui Miguel da Rocha Pereira Fernandes. Definição de uma lei coesiva para juntas
coladas em Carbono-Epóxido solicitadas em Modo II. University of Porto, FEUP, Porto,
Portugal. Supervision: José Chousal, Marcelo Moura.
Tatiana Vanessa Pires Caldeira. Caracterização experimental e numérica do comportamento frágil de ligações com cavilhas em estruturas de madeira. University of Trás-osMontes e Alto Douro, Vila Real, Portugal. Supervision: Abílio de Jesus (UTAD), Nuno
Dourado (UTAD).
Curriculum vitæ of J. Xavier
z
July 16, 2015
6/29
2011
2009
João Carlos Cunha Costa. Influência da água no comportamento de madeiras resinosas.
University of Minho, Guimarães, Portugal. Supervision: Jorge Branco, Aires Fernando
Camões (UM).
Helder Andrade Dinis Dâmaso. Comportamento à fractura em modo I e em modo II
de ligações coladas entre madeira e compósitos. University of Trás-os-Montes e Alto
Douro, Vila Real, Portugal. Supervision: José Morais (UTAD), Marcelo de Moura
(FEUP).
Journal reviewing
2015
2014
2013
2012
2011
BioResources m; Canadian Journal of Forest Research m; Ciência & Tecnologia dos
Materiais m; Composite Structures m; Engineering Fracture Mechanics m; Engineering
Science and Technology: an International Journal m; Journal of Cultural Heritage m;
Experimental Mechanics (2) m; Polymers m; Procedia Engineering m; Strain m; Wood
Science and Technology (2) m.
BioResources m; Composite Structures m; Construction & Building Materials m; Experimental Mechanics m; Fracture and Structural Integrity Journal m; Holzforschung m;
International Journal of Structural Integrity m; Mechanics Research Communications
m; Strain m; Wood Science and Technology m.
International Journal for Computational Methods in Engineering Science & Mechanics
m; Journal of the Mechanical Behavior of Biomedical Materials m; Holzforschung m;
Strain m.
Journal of Adhesion Science and Technology m; Journal of Materials: Design and
Applications m; Optics and Lasers in Engineering m.
Composites Part A: Applied Science and Manufacturing m; Experimental Mechanics m;
Mecânica Experimental (APAET) m
University service and management
2013–2014
2011–2012
2010–2014
Responsible Investigator of the task “Mechanical behaviour of bio-based materials (wood
and bone)” of the project “Bio-based materials” at CITAB m.
Responsible Investigator of the task “Mechanical behaviour of bio-based materials and
structures” of the project “Bio-based materials and energy” at CITAB.
Member of the Executive Committee of CITAB.
Internationalisation
2003–present
2011-present
2015-present
Fabrice Pierron (University of Southampton, UK m) and Stéphane Avril (Ecole des
Mines de Saint-Etienne, FR m): material parameter identification of heterogeneous
materials (wood, wood-based products, bio-based materials, bone tissue) by coupling
the virtual fields method with full-field deformation measurements.
Hannes Körber (Technical University of Munich, D m): high strain rate characterisation
of advanced composite material.
Fabrice Pierron (University of Southampton, UK m): high strain rate characterisation
of wood at the meso scale (letter of support to a EPSRC proposal
).
Curriculum vitæ of J. Xavier
z
July 16, 2015
7/29
2011-2015
2010-2012
2013-2017
2011-2015
2009-2012
José Fernandez-Cabo, Almudena Majano-Majano (Technical University of Madrid,
Madrid, ES m): multi-parameter identification of clear wood by coupling 3D full-field
measurements with the anisotropic-based method.
Mário Tomazel (University of São Paulo, BR m): mechanical characterisation of MDF
panels incorporating recycled sugarcane bagasse particles (Grices-Capes international
program m).
Portuguese representative of the Management Committee of the COST Action FP1302
- Wood Musick m.
Participating in the Working Group 3 of the of the FPS COST Action FP1004: “Enhance
mechanical properties of timber, engineered wood products and timber structures” m.
Portuguese representative of the Working Group 3: Computational modelling, of the
COST Action FP0802 - Experimental and computational methods in wood micromechanics m.
Prizes and awards received
2007
1999
Prize Eng.a Cruz Azevedo attributed by the Portuguese Association for Experimental
Stress Analysis to J. Xavier, N. Garrido, J. Morais, J. Pinto and P. Camanho, authors of
the article Numerical and experimental study of the variable span method for the identification of elastic properties of wood (in Portuguese), considered the best published
contribution in the journal Mecânica Experimental during 2007.
Prize Fundação Engenheiro António de Almeida for obtaining the highest classification in
the academic year of 1998/99 in the course of Mechanical Engineering at the University
of Trás-os-Montes e Alto Douro.
Foreign languages
English:
France:
Italian:
Understanding
C1
C1
C1
Speaking
C1
C1
B2
Writing
C1
C1
B1
Membership of scientific, organizing committees
2015 .
2014 .
.
2013 .
Member of the Scientific Committee. 10th International Conference on Advances in
Experimental Mechanics, British Society for Strain Measurement (BSSM), Heriot-Watt
University, Edinburgh, UK, 1-3 September. m
Chair, Sessions on Bio-Mechanics and Testing. 2nd International Conference of the International Journal of Structural Integrity, Funchal, Madeira, Portugal, 1-4 September.
m
Member of the organizing committee and national scientific committee of the XIV
Portuguese Conference on Fracture (PCF2014), University of Trás-os-Montes e Alto
Douro, Hotel Douro, Régua, Portugal, 6-7 Febrary. m
Chairman of the workshop: Bio-based material characterisation from full-field measurements, University of Trás-os-Montes e Alto Douro, Vila Real, Portugal, 9 July. m
Curriculum vitæ of J. Xavier
z
July 16, 2015
8/29
.
2012 .
2011 .
.
2010 .
2005 .
2004 .
2003 .
Chairman of the course deliver by Prof. Fabrice Pierron: The Virtual Fields Method:
Extracting Constitutive Mechanical Parameters from Full-field Deformation Measurements, University of Trás-os-Montes e Alto Douro, Vila Real, Portugal, 8 July. m
Chair, Session on Experimental methods for the mechanical characterization of composites. 15th International Conference on Experimental Mechanics, Faculty of Engineering,
University of Porto, Portugal, 22-27 July. m
Chair, Session on Ensaios e métodos experimentais. 1◦ Congresso Ibérico-Latino Americano de Madeira na Construção, CIMAD11, Universidade de Coimbra, Coimbra, 7-9
Junho.
Chairman of the workshop: Mixed numerical and experimental methods applied to the
mechanical characterization of bio-based materials, COST ACTION FP0802, Vila Real,
Portugal, 27-28 Abril. m
Chair, Session on Métodos Ópticos de Análise Experimental/Análise Dinâmica e
Vibrações/Comportamento de Materiais. 8◦ Congresso Nacional de Mecânica Experimental, APAET, Universidade do Minho, Guimarães, 21-23 Abril.
Member of the Organizing Committee of the 17 ème Congrès Français de Mécanique,
Troyes, France, 30 August-2 September.
Member of the Scientific Committee of the 1◦ Iberian Congress: Wood in Construction.
University of Minho, Guimarães, Portugal, 25-26 March.
Member of the Organizing Committee of the Workshop: Mecânica da Madeira, UTAD,
Vila Real, Portugal, 10 January.
Invited seminaries, scientific journeys, workshops, conferences.
COST Actions and STSM
2015: .
.
.
.
2014: .
Xavier, J.; Cruz, W.; Pierron, F.; Morais, J. Characterization of stiffness components
of wood from heterogeneous plate bending tests. Workshop “Effects of Playing on
Early and Modern Musical Instruments”, COST Action FP1302 – WOOD MUSICK,
London, Royal College of Music, UK, 9-10 September, 2015.
Silva, E.; Bochmann, C.; Xavier, J.; Fonseca, P.; Garganta, R Levels and angulations of
the left hand a contribute to violinistic techique. Workshop “Effects of Playing on
Early and Modern Musical Instruments”, COST Action FP1302 – WOOD MUSICK,
London, Royal College of Music, UK, 9-10 September, 2015.
J. Xavier, Heterogeneous bending tests for the characterisation of wooden plates. ShortTerm Scientific Mission (STSM) supported by COST Action FP1302 “WOOD MUSICK - WOODen MUSical Instrument Conservation and Knowledge”. Host: Fabrice
Pierron, University of Southampton, Southampton, UK, 22-27 June, 2015.
Xavier, J.; Majano-Majano, A.; Fernandez-Cabo, J. Identifiability of stiffness components of clear wood from a single off-axes compression test. COST Action FP1004,
LNEC, Lisbon, Portugal, 15-17 April, 2015.
6th Summer School on “Biomechanics: Trends in Modeling and Simulation”, Graz
University of Technology, Austria September 8-12, 2014. m
Curriculum vitæ of J. Xavier
z
July 16, 2015
9/29
.
.
.
2013: .
.
.
.
2012: .
.
.
.
Xavier, J. Heterogeneous bending tests for the characterisation of wooden plates.
Workshop “WOOD MUSICK - WOODen MUSical Instrument Conservation and
Knowledge”, COST Action FP1302, Paris, France, 27-28 February, 2014.
Monteiro, N.; Xavier, J.; Morais, J.J.L.; Dourado, N.; de Moura, M.F.S.F. Moisture
content effects on the fracture characterisation of P. pinaster under mode I. Workshop
“Thermo-hydro-Mechanical (THM) behaviour of wood”, COST Action FP0904,
Bordeaux, France, 13-14 February, 2014.
Training School on “Thermo-hydro-Mechanical (THM) behaviour of wood”, COST
Action FP0904, Bordeaux, France, 10-13 fèvrier, 2014.
Xavier, J. Identification of stiffness components of recycled MDF panels from full-field
curvature measurements. Workshop “Bio-based material characterisation from
full-field measurements”, UTAD, Vila Real, 9 July, 2013.
Parcipação no seminário “Casas de Madeira”, LNEC, Lisboa, 17 Abril.
Xavier, J. Assessing quality of wood and wood products by inverse identification methods based on full-field measurements. COST Young Researchers’ Forum at the
FTP-c8 Conference - ’Young Researchers Direct the Way to Innovation in the
Forest-Based Sector’, Barcelona, Spain, 11-13 March, 2013. (Poster Invitation – A
total of 180 proposals were received by the Committee and evaluated by a panel of 5
Experts, who have selected 20 proposals to be presented orally and 56 proposals to be
presented as posters).
J. Xavier, research visiting at Lehrstuhl für Carbon Composites in the Technische Universität München, 3-9 March, 2013. Seminar on material parameter characterisation
from full-field measurements, 6 March.
Xavier, J. Characterisation of the bending stiffness components of MDF panels from
full-field slope measurements. Seminário: trabalhos de investigação, CITAB/UTAD,
Vila Real, 5 Dezembro, 2012.
Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J. Assessing local properties of wood
within the stem from full-field measurements. COST Action FP0802 “Micro Characterisation of Wood Material & Properties”, Edinburgh, UK, 24-26 October, 2012.
J. Xavier, Characterisation of local properties of wood at the meso scale by coupling
full-field measurement with an inverse identification method. Short-Term Scientific
Mission (STSM) supported by COST Action FP0802 “Experimental and computational
micro-characterisation techniques in wood mechanics”. Host: Stéphane Avril, Ecole
Nationale Supérieure des Mines, Center for Health Engineering, St-Etienne, France,
12-21 September, 2012.
J. Xavier, Determining stiffness components of wood from 3D measurements. ShortTerm Scientific Mission (STSM) supported by COST Action FP1004 “Enhance mechanical properties of timber, engineered wood products and timber structures”. Host:
José Fernandez-Cabo, Polytechnic University of Madrid, Madrid, Spain, 24 June-1 July,
2012.
Curriculum vitæ of J. Xavier
z
July 16, 2015
10/29
.
Xavier, J. Wood and wood products characterisation from full-field measurements.
COST Action FP1004 “Enhance mechanical properties of timber, engineered
wood products and timber structures”, Zagreb, Croatia, 19-20 April, 2012.
2011: .
Curso teórico-prático “Introdução aos métodos sem malha - interpoladores radiais pontuais”, X Congresso Ibero-Americano em Engenharia Mecânica, Porto, Portugal, 3
September, 2011.
Curso teórico-prático “Análise de modelos de elementos finitos construídos a partir
de imagens médicas”, X Congresso Ibero-Americano em Engenharia Mecânica, Porto,
Portugal, 2 September, 2011.
CNRS Summer school “Identification procedures using full-field measurements: Applications in mechanics of materials and structures”, LMT - ENS de Cachan, Cachan,
June 27-July 1, 2011. m
Pereira, J.L.; Xavier, J.; Couto, P.; Morais, J.; Lousada, J. and Melo-Pinto, P. On the
variability of transverse elastic properties of P. pinaster at the cellular level. COST
Action FP0802 “Mixed numerical and experimental methods applied to the
mechanical characterization of bio-based materials”, UTAD, Vila Real, Portugal,
27-28 April, 2011.
Fernandes, A.; Lousada, J.; Morais, J.; Xavier, J.; Pereira, J.L.; Melo-Pinto, P. High
spatial resolution measurement of wood density using hyperspectral imaging and neural
networks. COST Action FP0802 “Mixed numerical and experimental methods
applied to the mechanical characterization of bio-based materials”, UTAD, Vila
Real, Portugal, 27-28 April, 2011.
.
.
.
.
2010: .
.
.
.
.
2009: .
Training School on “Experimental techniques”, COST Action FP0802, Max-PlanckInstitute of Colloids and Interfaces, Department of Biomaterials, Potsdam, Germany,
31 May-4 June, 2010. m
MRA Instrumentação (LIMESS, Automation Technology, TSC and 01dB): Novas Técnicas de Ensaios de Materiais, Porto, 27 January, 2010.
Xavier, J. Identification of mechanical properties of wood and wood products from plate
bending tests. Workshop de mecânica da madeira, UTAD, Vila Real, 22 Julho 2010.
Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J. On the characterisation of wood at
the growth ring scale. COST Actions IE0601 and FP0802 “Modeling mechanical
behavior of wooden cultural objects”, Polish Academy of Sciences, Krakow, Poland,
12-13 April, 2010.
Xavier, J. Full-field measurements on the mechanical characterisation of biological materials. Workshop de mecânica da madeira, UTAD, Vila Real, 29 Janeiro, 2010.
Xavier, J.; Pereira, J.L.; Morais, J.; Pierron, F.; Lousada, J. On the estimation of elastic
properties of wood at the growth ring scale. COST Action FP0802 “Experimental
and Computational Micro-Characterization Techniques in Wood Mechanics”,
Vienna University of Technology, Vienna, Austria, 11-13 May, 2009.
Curriculum vitæ of J. Xavier
z
July 16, 2015
11/29
.
Training School on “Experimental and computational micro-characterisation techniques
in wood mechanics”, COST Action FP0802, Vienna University of Technology, Vienna,
Austria, 7-10 May, 2009. m
2005: .
COST Action E35, Rosenheim Workshop, 29-30 September, 2005.
Xavier, J.; Avril, S.; Pierron, F.; Morais, J.; Marinescu, M. Identification des rigidités
du bois sur le plan LR par la méthode des champs virtuels : analyse des effets dus
à l’hétérogénéité des cernes de croissance. Journées de printemps du PPF “Élaboration et caractérisation de structures composites minces et épaisses”, CER
ENSAM de Bordeaux, 18-19 mai, 2005.
.
2004: .
.
.
.
2003: .
.
Atelier thématique photomécanique: Mesures optiques de champs en mécanique expérimentale des matériaux et des structures. Pôle Optique et Vision, Saint-Étienne, 6-12
juillet, 2004. m
Photoméchanique’04, Ecole des Mines d’Albi–Carmaux, 4-6 Mai, 2004. m
Cours de professionnalisation de l’Ecole Doctorale Arts et Métiers ParisTech: Innovation
et management de projets industriels. CER Paris, 15-19 Mars, 2004.
Cours scientifique de l’Ecole Doctorale Arts et Métiers ParisTech: Relations entre les
propriétés à l’échelle microscopique et macroscopique des milieux hétérogènes. CER
Paris, 9-12 Février, 2004.
Xavier, J. Characterization of the shear behaviour of wood using the Iosipescu test.
Seminaire, LMPF, Arts et Métiers ParisTech, 11 de Dezembro, 2003.
Advanced School and Workshop on Modeling and Numerical Simulation in Continuum
Mechanics. University of Coimbra, Portugal, 14-18 July, 2003. m
2002: .
Identification des propriétés mécaniques de matériaux et de structures à partir de
mesures de champs. Journée Scientifique AFM, Université Blaise Pascal, ClermontFerrand, 19 Avril, 2002.
2001: .
Xavier, J.; Oliveira, J.; Morais, J.; Nóvoa, P.; Lousada, J.; Marques, A. Aplicação
do princípio de sobreposição frequência-temperatura à madeira de P. pinaster Ait. III
Jornadas do ICETA, UTAD, Novembro, 2001.
Oliveira, J.; Xavier, J.; Morais, J.; Nóvoa, P.; Lousada, J.; Marques, A. Caracterização
da transição vítrea da madeira de P. pinaster Ait. III Jornadas do ICETA, UTAD,
Novembro, 2001.
Xavier, J.; Oliveira, J.; Morais, J. Simulação numérica do ensaio de Iosipescu aplicado
à madeira de Pinus loblolly. III Jornadas do ICETA, UTAD, Novembro, 2001.
Oliveira, J.; Xavier, J.; Morais, J.; Rouboa, A. Simulação numérica do ensaio de Arcan
aplicado à madeira de Pinus taeda L. III Jornadas do ICETA, UTAD, Novembro, 2001.
.
.
.
.
Garrido, N., Xavier, J.; Morais, J. Simulação computacional do ensaio de “off–axis”
aplicado à madeira de Pinus Loblolly. III Jornadas do ICETA, UTAD, Novembro,
2001.
Curriculum vitæ of J. Xavier
z
July 16, 2015
12/29
.
Pereira, J.L.; Garrido, N.; Xavier, J.; Morais, J. Simulação por elementos finitos do
ensaio de tracção perpendicular às fibras da madeira de pinho loblolly. III Jornadas do
ICETA, UTAD, Novembro, 2001.
Research Interests
–
–
–
–
Mechanical characterisation of biological tissues and structures.
Full-field optical methods in experimental mechanics (digital image correlation, grid
method, defletometry, feature tracking method, ESPI).
Mechanical and fracture identification methods (virtual fields method, anisotropic-based
method, compliance-based beam method).
Material characterisation at high strain rate loading based on full-field measurements.
Affiliation
Integrated
Collaborator
Collaborator
CITAB/UTAD. m
LAETA/INEGI (Laboratório associado). m
ISISI/University of Minho. m
List of publications
Chapter of books
[4]
[3]
[2]
[1]
Guedes, R.; Xavier, J. Understanding and predicting stiffness in advanced fibrereinforced polymer (FRP) composites for structural applications. In J. Bai (Ed.), Advanced fibre-reinforced polymer (FRP) composites for structural applications, 2013.
ISBN: 0 85709 418 1. m
Xavier, J.; Lopes, H.; Pierron, F. Evaluating stiffness components from full-field slope
measurements provided by deflectometry: phase-unwrapping analyses. In Dirckx J.
and Buytaert J. (Eds.), Optical Measurement Techniques for Systems and Structures,
Shaker Publishing B.V., pp. 489-499, 2013. ISBN: 978-90-423-0419-2.
(Book
proceedings) m
Pereira, J.; de Jesus, A.M.P.; Xavier, J. Characterisation of steel components under
monotonic loading by means of image-based methods. In Dirckx J. and Buytaert J.
(Eds.), Optical Measurement Techniques for Systems and Structures, Shaker Publishing
B.V., pp.319-329, 2013. ISBN: 978-90-423-0419-2. (Book proceedings)
Dourado, N.; Xavier, J.; Morais, J. On the identification of linear elastic mechanical
behaviour of orthotropic materials using evolutionary algorithms. In Burczynski T. and
Osyczka A. (Eds.), IUTAM Symposium on Evolutionary Methods in Mechanics (Solid
Mechanics and Its Applications Vol. 117), Springer Netherlands, 251-264, 2004. ISBN
1-4020-2266-2. (Book proceedings) m
Articles on international journals
(h–index = 13(9) cited by 481(281) total(independent) documents after Thomson
Reuters Web of Knowledge, Scopus and Google Schoolar – Quartil ISI JCR)
2015 (6)
Curriculum vitæ of J. Xavier
z
July 16, 2015
13/29
[39]
[38]
[37]
[36]
[35]
[34]
Fernandez-Cabo, J.; Arce Blanco, M.; Diez Barra, R.; Widmann, R.; Crocetti, R.;
Xavier, J.; Majano-Majano, A. Wire-frame analysis models of a historical planked timber
arch. Structures and buildings (accepted for publication).
Garzón-Roca, J.; Sena-Cruz, J.M.; Fernandes, P.; Xavier, J. Effect of wet-dry cycles
on the bond behaviour of concrete elements strengthened with NSM CFRP laminate
strips. Composite Structures 132: 331–340, 2015. m
(DOI:10.1016/j.compstruct.2015.05.053 | quartile category: Q1; category name: mechanics | journal impact factor in 2013: 3.120 | citations: 0 total/0 independent)
Catalanotti, C.; Xavier, J. Measurement of the mode II intralaminar fracture toughness
and R-curve of polymer composites using a modified Iosipescu specimen and the size
effect law. Engineering Fracture Mechanics 138: 202–214, 2015. m
(DOI:10.1016/j.engfracmech.2015.03.005 | quartile category: Q1; category name: mechanics | journal impact factor in 2013: 1.662 | citations: 0 total/0 independent)
Ghiassi, B.; Xavier, J.; Oliveira, D.V.; Kwiecien, A.; Lourenço, P.B.; Zajac, B. Evaluation of the bond performance in FRP-brick components repaired after delamination.
Composite Structures 123:271-281, 2015. m
(DOI:10.1016/j.compstruct.2014.12.047 | quartile category: Q1; category name: materials science, composites | journal impact factor in 2013: 3.120 | citations: 1 total/1
independent)
Koerber, H.; Xavier, J.; Camanho, P.P.; Essa, Y.E.; Martín de la Escalera, F. High
strain rate behaviour of unidirectional and textile composites under compression and
combined compression-shear loading. International Journal of Solids and Structures
54:172–182, 2015. m
(DOI:10.1016/j.ijsolstr.2014.10.018 | quartile category: Q1; category name: mechanics
| journal impact factor in 2013: 2.035 | citations: 0 total/0 independent)
Xavier, J.; Fernandes, J.R.A.; Frazão, O.; Morais, J.J.L. Measuring mode I cohesive law
of wood bonded joints by combining digital image correlation and fibre Bragg grating
sensors. Composite Structures 121:83-89, 2015. m
(DOI:10.1016/j.compstruct.2014.11.017 | quartile category: Q1; category name: materials science, composites | journal impact factor in 2013: 3.120 | citations: 2 total/0
independent)
2014 (10)
[33]
[32]
Xavier, J.; Oliveira, M.; Morais, J.; de Moura, M.F.S.F. Determining mode II cohesive
law of Pinus pinaster by combining the end-notched flexure test with digital image
correlation. Construction and Building Materials 71:109–115, 2014. m
(DOI:10.1016/j.conbuildmat.2014.08.021 | WOS:000345475300011 | quartile category:
Q1; category name: construction & building technology; engineering, civil; materials
science, multidisciplinary | journal impact factor in 2013: 2.265 | citations: 1 total/0
independent)
Xavier, J.; Monteiro P.; Morais, J.; Dourado, N.; de Moura, M.F.S.F. Moisture content
effects on the fracture characterisation of Pinus pinaster under mode I. Journal of
Materials Science 49(21):7371-7381, 2014. m
(DOI:10.1007/s10853-014-8375-0 | WOS:000340679000004 | quartile category: Q1;
category name: materials science, multidisciplinary | journal impact factor in 2013:
2.305 | citations: 2 total/0 independent)
Curriculum vitæ of J. Xavier
z
July 16, 2015
14/29
[31]
[30]
[29]
[28]
[27]
[26]
[25]
Subramani; P.; Rana, S.; Oliveira, D.V.; Fangueiro, R.; Xavier, J. Development of novel
auxetic structures based on braided composites. Material & Design 61: 286–295,
2014. m
(DOI:10.1016/j.matdes.2014.04.067 | WOS:000337854100036 | quartile category: Q1;
category name: materials science, multidisciplinary | journal impact factor in 2013:
3.171 | citations: 2 total/2 independent)
Arteiro, A.; Catalanotti, C.; Xavier, J.; Camanho, P.P. Large damage capability of noncrimp fabric thin-ply laminates. Composites Part A: Applied Science and Manufacturing 63: 110–122, 2014. m
(DOI:10.1016/j.compositesa.2014.04.002 | WOS:000337878300014 | quartile category:
Q1; category name: engineering, manufacturing; materials science, composites | journal
impact factor in 2013: 3.012 | citations: 2 total/1 independent)
Xavier, J.; Oliveira, J.; Monteiro, P.; Morais, J.J.L.; de Moura, M.F.S.F. Direct evaluation of cohesive law in mode I of Pinus pinaster by digital image correlation. Experimental Mechanics 54(5): 829-840, 2014. m
(DOI:10.1007/s11340-013-9838-y | WOS:000335762100011 | quartile category: Q1;
category name: materials science, characterization & testing | journal impact factor in
2013: 1.567 | citations: 7 total/0 independent)
Silva, F.; Morais, J.; Dourado, N.; Xavier, J.; Pereira, F.A.M.; de Moura, M.F.S.F.
Determination of cohesive laws in wood bonded joints under mode II loading using the
ENF test. International Journal of Adhesion and Adhesives 51: 54–61, 2014. m
(DOI:10.1016/j.ijadhadh.2014.02.007 | WOS:000336011100006 | quartile category: Q2;
category name: engineering, chemical; materials science, multidisciplinary | journal
impact factor in 2013: 2.216 | citations: 5 total/1 independent)
Pereira, J.C.R.; de Jesus, A.M.P.; Xavier, J.; Fernandes, A. Ultra low-cycle fatigue behaviour of a structural steel. Engineering Structures 60: 214–222, 2014. m
(DOI:10.1016/j.engstruct.2013.12.039 | WOS:000333783400022 | quartile category:
Q1; category name: engineering, civil | journal impact factor in 2013: 1.767 | citations: 2 total/1 independent)
Pereira, J.; Xavier, J.; Morais, J.; Lousada, J. Assessing wood quality by spatial variation of elastic properties within the stem: case study of P. pinaster in the transverse
plane. Canadian Journal of Forest Research, 44(2): 107-117, 2014. m
(DOI:10.1139/cjfr-2013-0207 | WOS:000331090300002 | quartile category: Q1; category name: forestry; ecology | journal impact factor in 2013: 1.071 | citations: 3 total/1
independent)
Catalanotti, C.; Xavier, J.; Camanho, P.P. Measurement of the compressive crack resistance curve of composites using the size effect law. Composites Part A: Applied
Science and Manufacturing, 56: 300-307, 2014. m
(DOI:10.1016/j.compositesa.2013.10.017 | WOS:000329264900030 | quartile category:
Q1; category name: engineering, manufacturing; materials science, composites | journal
impact factor in 2013: 3.012 | citations: 5 total/3 independent)
Curriculum vitæ of J. Xavier
z
July 16, 2015
15/29
[24]
Xavier, J.; Pereira, J.C.R.; de Jesus, A.M.P. Characterisation of steel components under
monotonic loading by means of image-based methods. Optics and Lasers in Engineering, 53:142–151, 2014. m
(DOI:10.1016/j.optlaseng.2013.09.004 | WOS:000326999900019 | quartile category:
Q2; category name: optics | journal impact factor in 2013: 1.695 | citations: 4 total/1 independent)
2013 (10)
[23]
[22]
[21]
[20]
[19]
[18]
Silva, F.; Xavier, J.; Pereira, F.A.M.; Morais, J.; Dourado, N.; de Moura, M.F.S.F.
Determination of cohesive laws in wood bonded joints under mode I loading using the
DCB test. Holzforschung 67(8): 913-922, 2013. m
(DOI:10.1515/hf-2013-0012 | WOS:000330224300011 | quartile category: Q1; category
name: Materials science, Paper & Wood; Forestry | journal impact factor in 2013: 2.339
| citations: 9 total/2 independent)
Arteiro, A.; Catalanotti, C.; Xavier, J.; Camanho, P.P. Notched response of non-crimp
fabric thin-ply laminates: analysis methods. Composites Science and Technology,
88: 165-171, 2013. m
(DOI:10.1016/j.compscitech.2013.09.003 | WOS:000326913500023 | quartile category:
Q1; category name: materials science, composites | journal impact factor in 2013: 3.633
| citations: 4 total/3 independent)
Dias, G.F.; de Moura, M.F.S.F.; Chousal, J.A.G.; Xavier, J. Cohesive laws of composite
bonded joints under mode I loading. Composite Structures 106: 646–652, 2013. m
(DOI:10.1016/j.compstruct.2013.07.027 | WOS:000325447700059 | quartile category:
Q1; category name: Materials science, Composites | journal impact factor in 2013:
3.120 | citations: 10 total/6 independent)
Ghiassi, B.; Xavier, J.; Oliveira, D.; Lourenço, P. Application of digital image correlation
in investigating the bond between FRP and masonry. Composite Structures 106: 340349, 2013. m
(DOI:10.1016/j.compstruct.2013.06.024 | WOS:000325447700032 | quartile category:
Q1; category name: Materials science, Composites | journal impact factor in 2013:
3.120 | citations: 17 total/12 independent)
Fernandes, R.M.R.P.; Chousal, J.A.G.; de Moura, M.F.S.F.; Xavier, J. Determination
of cohesive laws of composite bonded joints under mode II loading. Composites Part
B: Engineering 52: 269–274, 2013. m
(DOI:10.1016/j.compositesb.2013.04.007 | WOS:000321722500033 | quartile category:
Q1; category name: engineering, multidisciplinary; materials science, composites | journal impact factor in 2013: 2.602 | citations: 10 total/5 independent)
Fernandes, A.; Lousada, J.; Morais, J.; Xavier, J.; Pereira, J.L.; Melo-Pinto, P. Comparison between neural networks and partial least squares for intra growth ring wood density
measurement with hyperspectral imaging. Computers and Electronics in Agriculture
94: 71-81, 2013. m
(DOI:10.1016/j.compag.2013.03.010 | WOS:000319641000008 | quartile category: Q1;
category name: agriculture, multidisciplinary | journal impact factor in 2013: 1.486 |
citations: 2 total/2 independent)
Curriculum vitæ of J. Xavier
z
July 16, 2015
16/29
[17]
[16]
[15]
[14]
Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P. Notched response of non-crimp
fabric thin-ply laminates. Composites Science and Technology 79: 97-114, 2013. m
(DOI:10.1016/j.compscitech.2013.02.001 | WOS:000318377900014 | quartile category:
Q1; category name: materials science, composites | journal impact factor in 2013: 3.633
| citations: 14 total/11 independent)
Xavier, J.; Belini, U.; Pierron, F.; Morais, J.; Lousada, J.; Tomazello, M. Characterisation of bending stiffness components of MDF panels from full-field slope measurements.
Wood Science and Technology 47(2): 423-441, 2013. m
(DOI:10.1007/s00226-012-0507-6 | WOS:000314981900015 | quartile category: Q1;
category name: Forestry; Materials science, Paper & Wood | journal impact factor in
2013: 1.873 | citations: 9 total/5 independent)
Fernandes, A.; Lousada, J.; Morais, J.; Xavier, J.; Pereira, J.L.; Melo-Pinto, P. Measurement of intra-ring wood density by means of imaging VIS/NIR spectroscopy (hyperspectral imaging). Holzforschung 67(1): 59-65, 2013. m
(DOI:10.1515/hf-2011-0258 | WOS:000313520100009 | quartile category: Q1; category
name: Materials science, Paper & Wood; Forestry | journal impact factor in 2013: 2.339
| citations: 5 total/5 independent)
Ercin, G.H.; Camanho, P.P.; Xavier, J.; Catalanotti, G.; Mahdi, S.; Linde, P. Size effects
on the tensile and compressive failure of notched composite laminates. Composite
Structures 96: 736–744, 2013. m
(DOI:10.1016/j.compstruct.2012.10.004 | WOS:000313776900073 | quartile category:
Q1; category name: Materials science, Composites | journal impact factor in 2013:
3.120 | citations: 13 total/9 independent)
2012 (2)
[13]
[12]
Xavier, J.; Sousa, A.M.R.; Morais, J.J.L.; Filipe, V.M.J.; Vaz, M. Measuring displacement fields by cross-correlation and a differential technique: experimental validation.
Optical Engineering 51, 043602, 2012. m
(DOI:10.1117/1.OE.51.4.043602 | WOS:000304015100016 | quartile category: Q1; category name: optics | journal impact factor in 2012: 0.880 | citations: 15 total/4 independent)
Xavier, J.; de Jesus, A.M.P.; Morais, J.J.L.; Pinto, J.M.T. Stereovision measurements
on evaluating the modulus of elasticity of wood by compression tests parallel to the
grain. Construction and Building Materials 26(1): 207–215, 2012. m
(DOI:10.1016/j.conbuildmat.2011.06.012 | WOS:000295754200025 | quartile category:
Q1; category name: construction & building technology; engineering, civil; materials
science, multidisciplinary | journal impact factor in 2012: 2.293 | citations: 41 total/14
independent)
2011 (3)
[11]
Sousa, A.M.R.; Xavier, J.; Vaz, M.; Morais, J.J.L.; Filipe, V.M.J. Cross-correlation and
differential technique combination to determine displacement fields. Strain 47(SUPPL.
2): 87-98, 2011. m
(DOI:10.1111/j.1475-1305.2010.00740.x | WOS:000298481800009 | quartile category:
Q3; category name: materials science, characterization & testing | journal impact factor
in 2011: 1.103 | citations: 22 total/6 independent)
Curriculum vitæ of J. Xavier
z
July 16, 2015
17/29
[10]
[9]
Xavier, J.; Morais, J.; Dourado, N.; de Moura, M.F.S.F. Measurement of mode I and
mode II fracture properties of wood-bonded joints. Journal of Adhesion Science and
Technology 25(20): 2881–2895, 2011. m
(DOI:10.1163/016942411X576563 | WOS:000297483300009 | quartile category: Q3;
category name: engineering, chemical; materials science, multidisciplinary; mechanics |
journal impact factor in 2011: 0.948 | citations: 6 total/2 independent)
Sousa, A.M.R.; Xavier, J.; Morais, J.J.L.; Filipe, V.M.J.; Vaz, M. Processing discontinuous displacement fields by a spatio-temporal derivative technique. Optics and Lasers
in Engineering 49(12): 1402-1412, 2011. m
(DOI:10.1016/j.optlaseng.2011.07.007 | WOS:000295150800005 | quartile category:
Q2; category name: optics | journal impact factor in 2011: 1.838 | citations: 22 total/6
independent)
2010 (4)
[8]
[7]
[6]
[5]
Koerber, H.; Xavier, J.; Camanho, P.P. High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital
image correlation. Mechanics of Materials 42(11): 1004-1019, 2010. m
(DOI:10.1016/j.mechmat.2010.09.003 | WOS:000284660200004 | quartile category:
Q1; category name: mechanics | journal impact factor in 2010: 1.911 | citations: 53
total/48 independent)
(This has been the most cited article in Mechanics of Materials published since 2010;
extracted from Scopus in January 2015
.)
Catalanotti, G.; Camanho, P.P.; Xavier, J.; Dávila, C.G.; Marques, A.T. Measurement
of resistance curves in the longitudinal failure of composites using digital image correlation. Composites Science and Technology 70(13): 1986-1993, 2010. m
(DOI:10.1016/j.compscitech.2010.07.022 | WOS:000283611000029 | quartile category:
Q1; category name: materials science, composites | journal impact factor in 2010: 2.863
| citations: 37 total/27 independent)
Morais, J.J.L.; de Moura, M.F.S.F.; Pereira, F.A.M.; Xavier, J.; Dourado, N.; Dias,
I.R.; Azevedo, J.M.T. The double cantilever beam test applied to mode I fracture
characterization of cortical bone tissue. Journal of the Mechanical Behavior of
Biomedical Materials, 3(6): 446-453, 2010. m
(DOI:10.1016/j.jmbbm.2010.04.001 | WOS:000280499100004 | quartile category: Q2;
category name: engineering, biomedical; materials science, biomaterials | journal impact
factor in 2010: 3.297 | citations: 26 total/20 independent)
de Moura, M.F.S.F.; Oliveira, J.M.Q.; Morais, J.J.L.; Xavier, J. Mixed-mode I/II wood
fracture characterization using the mixed-mode bending test. Engineering Fracture
Mechanics,77(1): 144-152, 2010. m
(DOI:10.1016/j.engfracmech.2009.09.014 | WOS:000274559100010 | quartile category:
Q2; category name: mechanics | journal impact factor in 2010: 1.576 | citations: 7
total/6 independent)
2009 (2)
Curriculum vitæ of J. Xavier
z
July 16, 2015
18/29
[4]
[3]
Xavier, J.; Avril; S.; Pierron, F.; Morais, J. Variation of transverse and shear stiffness
properties of wood in a tree. Composites Part A: Applied Science and Manufacturing, 40(12): 1953-1960, 2009. m
(DOI:10.1016/j.compositesa.2009.09.023 | WOS:000272861000016 | quartile category:
Q1; category name: engineering, manufacturing; materials science, composites | journal
impact factor in 2009: 2.410 | citations: 17 total/8 independent)
Xavier, J.; Oliveira, M.; Morais, J.; Pinto, J. Measurement of the shear properties of
clear wood by the Arcan test. Holzforschung, 63(2): 217–225, 2009. m
(DOI:10.1515/HF.2009.034 | WOS:000263932200013 | quartile category: Q1; category
name: Materials science, Paper & Wood; Forestry | journal impact factor in 2009: 1.236
| citations: 14 total/7 independent)
2007 (1)
[2]
Xavier, J.; Avril; S.; Pierron, F.; Morais, J. Novel experimental approach for
longitudinal-radial stiffness characterisation of clear wood by a single test. Holzforschung, 61(5): 573-581, 2007. m
(DOI:10.1515/HF.2007.083 | WOS:000249326500018 | quartile category: Q1; category
name: Materials science, Paper & Wood; Forestry | journal impact factor in 2007: 0.811
| citations: 30 total/14 independent)
2004 (1)
[1]
Xavier, J.C.; Garrido, N.M.; Oliveira, M.; Morais, J.L.; Camanho, P.P.; Pierron, F. A
comparison between the Iosipescu and off-axis shear test methods for the shear characterization of Pinus pinaster Ait. Composites Part A: Applied Science and Manufacturing, 35(7-8): 827-840, 2004. m
(DOI:doi:10.1016/j.compositesa.2004.01.013 | WOS:000221904600008 | quartile category: Q1; category name: engineering, manufacturing; materials science, composites |
journal impact factor in 2007: 1.662 | citations: 63 total/49 independent)
Articles on national journals
2015 (2)
[8]
[7]
Xavier, J.; Fernandes, J.R.A.; Morais, J.J.L.; Frazão, O. Fracture behaviour of wood
bonded joints under modes I and II by digital image correlation and fibre Bragg grating
sensors. Ciência e Tecnologia dos Materiais, Special Issue PCF 2014 (current status:
accepeted with minor revisions, 06/2015). m
Xavier, J.; Oliveira, M.; Morais, J.J.L.; de Moura, M.F.S.F. Determining mode I cohesive law of Pinus pinaster by coupling double cantilever beam test with digital image
correlation. Frattura ed Integrità Strutturale/Fracture and Structural Integrity
31:13-22, 2015. m
2012 (3)
[6]
[5]
Sousa, A.M.R.; Xavier, J.; Vaz, M.; Morais, J.J.L.; Filipe, V.M.J. Measurement of
displacement fields with sub-pixel accuracy by combining cross-correlation and optical
flow. Mecânica Experimental, 21:101-109, 2012.
Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J.; Pierron, F. On the evaluation of elastic
properties of P. pinaster at the growth ring scale. Mecânica Experimental, 20:51-58,
2012.
Curriculum vitæ of J. Xavier
z
July 16, 2015
19/29
[4]
Xavier, J.; de Jesus, A.M.P.; Morais, J.; Pinto, J. On the determination of the modulus
of elasticity of wood by compression tests parallel to the grain. Mecânica Experimental, 20:59-66, 2012.
2008 (1)
[3]
Xavier, J.; Avril, S.; Pierron, F.; Morais, J. Characterisation of the radial variability of
stiffness parameters of P. pinaster by the virtual fields method. Mecânica Experimental, 16:89-98, 2008. m
2007 (1)
[2]
Xavier, J.; Garrido, N.; Morais, J.; Pinto, J.; Camanho, P.P. Estudo numérico e experimental do método do vão variável para a identificação das propriedades elásticas da
madeira. Mecânica Experimental, 14:59-65, 2007 (Prize Eng.o Cruz Azevedo). m
2001 (1)
[1]
Xavier, J.; Dourado, N.; Morais, J.; Conceição António, C. Identification of elastic properties of orthotropic materials using evolutionary algorithms. Mecânica Experimental,
6: 45-56, 2001. m
Articles on international congresses
2015 (7)
[54]
[53]
[52]
[51]
[50]
[49]
de Moura, M.F.S.F.; Silva, F.G.A.; Dourado, N.; Xavier, J.; Pereira, F.A.M.; Morais,
J.J.L.; Dias, M.I.R.; Lourenço, P.J.; Judas, F.M. Determination of mode I fracture
toughness of cortical human bone using the DCB test. 6th International Conference on Mechanics and Materials in Design - M2D’2015, Ponta delgada, Açores,
Portugal, 26-30 July, 2015. (oral presentation) m
Pinto, V.C.; Xavier, J.; Gonçalves, C.; Magalhães, F.D.; Guedes, R.M. Hydrolytic degradation rates for molecular weight and tensile strength of PLA/GNP and PLA/CNTCOOH in PBS medium. 6th International Conference on Mechanics and Materials
in Design - M2D’2015, Ponta delgada, Açores, Portugal, 26-30 July, 2015. (submitted) (oral presentation)
Dourado, N.; de Moura, M.F.S.F.; de Jesus, A.; Xavier, J. Numerical and experimental
characterization of steel-wood doweled joints under quasi-static loading. 6th International Conference on Mechanics and Materials in Design - M2D’2015, Ponta
delgada, Açores, Portugal, 26-30 July, 2015. (submitted) (oral presentation)
Cantalonotti, G.; Xavier, J.; Camanho, P.P. Fracture toughness and crack resistance
curves in the longitudinal compressive failure of polymer composites 6th International
Conference on Mechanics and Materials in Design - M2D’2015, Ponta delgada,
Açores, Portugal, 26-30 July, 2015. (submitted) (oral presentation)
Xavier, J.; Lopes, H.; Pierron, F.; Morais, J.; Vaz M. Measuring orthotropic stiffness
components of wood by plate bending tests. Photomechanics15, Delf, Netherlands,
26-29 May, 2015. (oral publication) m
Rana, S.; Parveen, S.; Fangueiro, R.; Paiva, M.C.; Xavier, J. Development of Ductile
Cementitious Composites Using Carbon Nanotubes. Nanoscience and Nanotechnology International Conference - NanoPT2015, Porto, Portugal, 11-13 February,
2015. (oral publication) m
Curriculum vitæ of J. Xavier
z
July 16, 2015
20/29
[48]
Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho P.P. A Finite Fracture Mechanics
model for the prediction of the notched response and large damage capability of composite laminates. 13th International Conference on Fracture and Damage Mechanics,
São Miguel Island, Azores, Portugal, September 23-25, 2014. (oral presentation)
Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P. A Finite Fracture Mechanics
model for the prediction of the notched response and large damage capability of composite laminates. Key Engineering Materials – Advances in Fracture and Damage
Mechanics XIII 627:13-16, 2015. m
(DOI:10.4028/www.scientific.net/KEM.627.13 | citations: 0 total/0 independent)
2014 (8)
[47]
[46]
[45]
[44]
[43]
[42]
[41]
Cruz, W. Xavier, J.; Pierron, F.; Morais, J. Characterization of orthotropic stiffness
components of Pinus pinaster from heterogeneous plate bending tests. II International
Conference of the International Journal of Structural Integrity, 1-4 September,
Funchal, Portugal, 2014. (oral presentation)
Silva A.L.L.; Xavier, J.; Carvalho, D.; Jesus, A.M.P.; Fernandes, A.A. Evaluation of
mixed-mode I+II fatigue crack propagation in steels assisted by DIC. II International
Conference of the International Journal of Structural Integrity, 1-4 September,
Funchal, Portugal, 2014. (oral presentation)
Pereira, J.C.R.; de Jesus, A.M.P.; Fernandes, A.A.; Xavier, J. ULCF and cyclic elastoplastic behaviour of linepipe steel grades. 11th World Congress on Computational
Mechanics (WCCM XI), 5th European Conference on Computational Mechanics
(ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD
VI) Barcelona, Spain, July 20-25, 2014. (oral presentation)
Pereira, J.C.R.; de Jesus, A.M.P.; Coppola, T.; Fernandes, A.A.; Iob, F.; Campanelli, F.;
Xavier, J. Monotonic and ULCF behaviour of pipeline steels and components. models
identification and aplications. 11th World Congress on Computational Mechanics
(WCCM XI), 5th European Conference on Computational Mechanics (ECCM
V), 6th European Conference on Computational Fluid Dynamics (ECFD VI)
Barcelona, Spain, July 20-25, 2014. (oral presentation)
Pereira, J.C.R.; de Jesus, A.M.P.; Fernandes, A.A., Xavier, J.; Martins, B. Comparisons
of Monotonic, Low-Cycle and Ultra-Low-Cycle Fatigue Behaviours of X52, X60 and X65
Piping Steel Grades. ASME Pressure Vessels & Piping Conference, Hyatt Regency
Orange County, USA, 20-24 July, 2014. (oral presentation)
Pereira, J.C.R., De Jesus, A.M.P., Fernandes, A.A., Xavier, J., Martins, B. Comparison
of the monotonic, low-cycle and ultra-low-cycle fatigue behaviours of the X52, X60 and
X65 piping steel grades. Proc. ASME. 46032; Volume 6A: Materials and Fabrication,
V06AT06A015.July 20, 2014 PVP2014-28761. (DOI:10.1115/PVP2014-28761) m
Koerber, H.; Xavier, J.; Camanho, P.P.; Sainz de Aja, J.R.; Essa, Y. High strain rate
behaviour of textile composites under compression and combined compression-shear
loading. 16th International Conference on Experimental Mechanics - ICEM16,
University of Cambridge, UK, 7-11 July, 2014. (oral presentation)
Pinto, V.; Xavier, J.; Guedes, R.M. Experimental creep analysis of biodegradable polymer matrix nanocomposites for ACL replacement. 16th European Conference on
Composite Materials - ECCM16, Seville, Spain, 22-26 June, 2014. (oral presentation)
Curriculum vitæ of J. Xavier
z
July 16, 2015
21/29
[40]
Fernandes, R.A.; Passos, D.J.; Xavier, J.; Morais, J.; Frazão, O. Initial studies of glued
wood joints using FBG strain sensors. 3rd Mediterranean Photonics Conference
Trani, Italy, 7-9 May, 2014. (poster presentation)
Fernandes, J.; Passos, D.; Xavier, J.; Morais, J. & Frazao, O. Initial
studies of glued wood joints using FBG strain sensors. Photonics Conference, 2014 Third Mediterranean, MePhoCo 2014 6866495, p.
1-3, 2014.
(DOI:10.1109/MePhoCo.2014.6866495) m
2013 (11)
[39]
[38]
[37]
[36]
[35]
[34]
[33]
[32]
Koerber, H.; Xavier, J.; Camanho, P.P.; Sainz de Aja, J.R.; Essa, Y. High strain rate
behaviour of unidirectional and textile composites under compression and combined
compression-shear loading. High speed imaging for dynamic testing of materials
and structures (21st DYMAT Technical Meeting), Institute of Physics, London,
UK, 18-20 November, 2013. (oral presentation) m
Pinto, V.C.; Xavier, J.; Pinto, A.; Magalhães, F.D.; Guedes, R.M. Mechanical study of
biodegradable nanocomposites for anterior cruciate ligament replacement. 5th International Conference on Structural Analysis of Advanced Materials, ICSAAM-2013,
Kipriotis Village Resort, Island of Kos, Greece, 23-26 September, 2013. (oral presentation) m
Koerber, H.; Xavier, J.; Camanho, P.P.; Sainz de Aja, J.R.; Essa, Y. High strain rate
behaviour of textile composites under compression and combined compression-shear
loading. IV ECCOMAS Thematic Conference on the Mechanical Response of
Composites, University of the Azores, Ponta Delgada, Azores, Portugal, 25-27 September, 2013. (oral presentation) m
Catalanotti, G.; Xavier, J.; Camanho, P.P. Fracture toughness and crack resistance
curves in the longitudinal compressive failure of polymer composites. IV ECCOMAS
Thematic Conference on the Mechanical Response of Composites, University of
the Azores, Ponta Delgada, Azores, Portugal, 25-27 September, 2013. (oral presentation)
Pinto, V.C.; Xavier, J.; Pinto, A.; Magalhães, F.D.; Guedes, R.M. Mechanical analysis
of biodegradable nanocomposites for ACL replacement. 25th European Conference
on Biomaterials, Madrid, Espanha, 2013, 8-12 September, 2013. (poster presentation)
m
Arteiro, A.; Catalanotti, G.; Xavier, J.; Camanho, P.P. Notched response of non-crimp
fabric thin-ply laminates. 19th International Conference on Composite Materials
(ICCM19), Montreal, Canada, July 28–August 2, 2013. (oral presentation) m
Pinto, V.C.; Xavier, J.; Pinto, A.; Magalhães, F.D.; Guedes, R.M. Biodegradable
nanocomposites for ACL replacement medical device; a mechanical study. 19th
Congress of the European Society of Biomechanics, University of Patras, Greece,
2013, 25-28 August, 2013. (poster presentation) m
Pereira, J.; de Jesus, A.; Xavier, J.; Fernandes, A.A. Characterization of X60 steel grade
under ultra low cycle fatigue loading. 4th International Conference on Integrity,
Reliability and Failure of Mechanical Systems (IRF2013), University of Porto,
Funchal, Madeira, Portugal, June 23-27, 2013. (oral presentation) m
Curriculum vitæ of J. Xavier
z
July 16, 2015
22/29
[31]
[30]
[29]
Pinto, V.; Xavier, J.; Pinto, A.; Magalhães, F.D.; Guedes, R. A mechanical analysis
of biodegradable nanocomposites for ACL replacement medical device. 4th International Conference on Integrity, Reliability and Failure of Mechanical Systems
(IRF2013), University of Porto, Funchal, Madeira, Portugal, June 23-27, 2013. (oral
presentation)
Dourado, N.; Silva, F.; Xavier, J.; de Moura, M.F.S.F. Determination of the concrete
cohesive law under mode I loading using an inverse method. 4th International Conference on Integrity, Reliability and Failure of Mechanical Systems (IRF2013),
University of Porto, Funchal, Madeira, Portugal, June 23-27, 2013. (oral presentation)
Xavier, J.; Belini, U.; Pierron, F.; Morais, J.; Lousada, J.; Tomazello, M. Characterisation of stiffness components of medium density fiberboard panels by heterogeneous plate
bending tests. 1st International Conference on Natural Fibers: Sustainable Materials for Advanced Applications, University of Minho, Guimarães, Portugal, June
9-11, 2013. (oral presentation) m
2012 (13)
[28]
[27]
[26]
[25]
[24]
[23]
[22]
Majano-Majano, A.; Fernandez-Cabo, J.; Xavier, J. Characterization of clear wood by
a single specimen: evaluation of first results and further improvements. 6th European Congress on Computational Methods in Applied Sciences and Engineering
(ECCOMAS 2012), Vienna, Austria, 10-14 September, 2012. (oral presentation) m
Mata, H.; Natal Jorge, R.; Parente, M.P.L.; Fernandes, A.A.; Santos, A.D.; Valente,
R.A.F.; Xavier, J. Establishment of the mechanical properties of aluminium alloy of
sandwich plates with metal foam core by using an image correlation procedure. 3rd
Computational Modeling of Objects Presented in Images: Fundamentals, Methods and Applications (CompIMAGE2012), Rome, Italy, 5-7 September, 2012. (oral
presentation) m
Xavier, J.; Majano-Majano, A.; Fernandez-Cabo, J. Identifiability of stiffness components of clear wood from a single off-axes compression test. 15th International Conference on Experimental Mechanics, Faculty of Engineering, University of Porto,
Portugal, 22-27 July, 2012. (oral presentation) m
Ercin, G.H.; Camanho, P.P.; Xavier, J.; Mahdi, S.; Linde, P. Size effects on the tensile
and compressive failure of notched composite laminates. 15th International Conference on Experimental Mechanics, Faculty of Engineering, University of Porto,
Portugal, 22-27 July, 2012. (oral presentation)
Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J. Evaluating wood transverse elastic properties at the meso scale by digital image correlation. 15th International Conference
on Experimental Mechanics, Faculty of Engineering, University of Porto, Portugal,
22-27 July, 2012. (oral presentation)
Pereira, J.; de Jesus, A.M.P.; Xavier, J. Modelling monotonic behaviour in steel components supported by image-based methods. 15th International Conference on Experimental Mechanics, Faculty of Engineering, University of Porto, Portugal, 22-27
July, 2012. (oral presentation)
Pereira, J.; de Jesus, A.M.P.; Xavier, J.; Tavares, J. Characterisation of S185 steel under
monotonic loading by a feature tracking method. 15th International Conference on
Experimental Mechanics, Faculty of Engineering, University of Porto, Portugal, 22-27
July, 2012. (poster presentation)
Curriculum vitæ of J. Xavier
z
July 16, 2015
23/29
[21]
[20]
[19]
[18]
[17]
[16]
Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J. Assessing quality of wood by spatial
variation of transverse elastic properties of wood within the stem. IUFRO - All-Division
5 Conference, Estoril Conference Centre, Lisbon, Portugal, 8-13 July, 2012. (oral
presentation) m
Fernandes, A.; Lousada, J.; Morais, J.; Xavier, J.; Pereira, J.L.; Melo-Pinto, P. Intra growth ring wood density measurement using hyperspectral imaging and neural
networks. IUFRO - All-Division 5 Conference, Estoril Conference Centre, Lisbon,
Portugal, 8-13 July, 2012. (poster presentation)
Sena-Cruz, J.; Fernandes, P.; Silva, P.; Xavier, J.; Barros J.; Coelho M. Bond behaviour
of concrete elements strengthened with NSM CFRP laminate strips under wet-dry cycles.
Bond in Concrete, Brescia, Italy, 17-20 June, 2012. (oral presentation) m
Xavier, J.; Morais, J.; Diaquino, B.; Pereira, F. Characterisation of the shear behaviour
of bovine cortical bone by the Arcan test. Euromech Colloquium on “advanced
experimental approaches and inverse problems in tissue biomechanics”, Ecole
des Mines de Saint-Etienne, France, 28-31 May, 2012. (oral presentation) m
Xavier, J.; Lopes, H.; Pierron, F.; Phase unwrapping algorithms on evaluating stiffness components from full-field slope measurements provided by deflectometry. 5th
International Conference on Optical Measurement Techniques for Structures
and Systems – OPTIMESS, University of Antwerp, Belgium, 4-5 April, 2012. (oral
presentation) m
Pereira, J.; de Jesus, A.M.P.; Xavier, J. Characterisation of steel components under
monotonic loading by means of image-based methods. 5th International Conference
on Optical Measurement Techniques for Structures and Systems – OPTIMESS,
University of Antwerp, Belgium, 4-5 April, 2012. (poster presentation)
2011 (3)
[15]
[14]
[13]
Koerber, H.; Xavier, J.; Camanho, P.P. High strain rate behavior of unidirectional
carbon-epoxy IM7-8552 material characterization and modeling. 3rd Thematic Conference on Mechanical Response of Composites – ECCOMAS, Hannover, Germany,
21-23 September, 2011. (oral presentation) m
Koerber, H.; Xavier, J.; Camanho, P.P. High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear via digital
image correlation. 5th International Conference on Composites Testing and Model
Identification, EPFL, Lausanne, Switzerland, 14-16 February, 2011. (oral presentation)
m
Sousa, A.; Xavier, J.; Morais, J.; Vaz, M.; Filipe, V. Evaluation of displacement discontinuities by digital image correlation and differential techniques. International conference on full-field measurement techniques and their applications in experimental
solid mechanics (Photomechanics 2011), Vrije Universiteit Brussel, Brussels, Belgium, 7-9 February 2011. (oral presentation) m
2010 (3)
[12]
Körber, H.; Xavier, J.; Camanho, P.P. High strain rate characterisation of unidirectional
carbon-epoxy IM7-8552 in transverse compression and in-plane shear via digital image
correlation. 19th DYMAT Technical Meeting, Strasbourg, France, 1-3 December
2010. (oral presentation) m
Curriculum vitæ of J. Xavier
z
July 16, 2015
24/29
[11]
[10]
Morais, J.J.L.; Xavier, J.; Dourado, N.M.M.; de Moura, M.F.S.F. Mode I and Mode II
Fracture Characterization of Wood Bonded Joints. 4th International Conference on
Advanced Computational Engineering and Experimenting, Paris, France, 8-9 July,
2010. (poster presentation) m
Körber, H.; Xavier, J.; Camanho, P.P. High strain rate characterisation of unidirectional
carbon-epoxy IM7-8552 in compression and in-plane shear via digital image correlation.
14th European Conference on Composite Materials, Budapest University of Technology and Economics, Budapest, Hungary, 7-10 June, 2010. (oral presentation) m
2009 (2)
[9]
[8]
Xavier, J.; Custódio, P.; Morais, J.; Guedes, R. Assessing mechanical properties of a
polymer material by a video extensometer technique. 7th EUROMECH Solid Mechanics Conference, J. Ambrosio et. al. (Eds.), pp. 253-260, IST, Lisbon, Portugal,
7-11 September, 2009. (oral presentation) m
Pereira, F.; Xavier, J.; Morais, J.; Braga, P. Characterisation of bovine bone tissue by
tensile and three-point bending tests. 3rd International Conference on Advanced
Computational Engineering and Experimenting, Rome, Italy, 22-23 June, 2009.
(poster presentation) m
2008 (2)
[7]
[6]
Xavier, J.; Avril, S.; Pierron, F.; Morais, J. Parameter identification by the virtual fields
method: application to the stiffness radial variability of P. pinaster within the stem.
4th International Conference on Composites Testing and Model Identification,
Dayton, Ohio, USA, 20-22 October, 2008. (oral presentation) m
Xavier, J.; Pinto, J.; de Jesus, A.M.P.; Morais, J. Application of stereovision to wood
compression tests. 1st Conference on 3D-Imaging of Materials and Systems,
Carcans-Maubuisson, France, 8-12 Septembre, 2008. (poster presentation) m
2006 (1)
[5]
Xavier, J.; Avril, S.; Pierron, F.; Morais, J. Application of the Virtual Fields Method to
the characterisation of the anisotropic LR stiffnesses of P. pinaster wood. 4th International Conference of the European Society for Wood Mechanics, Florence, Italy,
14-17 May, 2006. (oral presentation)
2005 (1)
[4]
Xavier, J.; Avril, S.; Pierron, F.; Morais, J.; Marinescu, M. Identification of clear wood
orthotropic stiffnesses using full-field measurements. 8th European Mechanics of Materials Conference – Material and structural identification from full-field measurements, Cachan, France, 13-15 September, 2005. (oral presentation) m
2003 (1)
[3]
Xavier, J.; Garrido, N.; Oliveira, J.; Morais, J.; Camanho, P.P.; Pierron, F. A comparison of shear characterization of P. pinaster Ait. with the Iosipescu and off-axis shear test
methods. 1st International Conference on Composites Testing and Model Identification, Arts et Métiers ParisTech, Châlons-en-Champagne, France, 28-30 January,
2003. (oral presentation)
2002 (1)
Curriculum vitæ of J. Xavier
z
July 16, 2015
25/29
[2]
Dourado, N.; Xavier, J.; Morais, J. On the identification of mechanical behaviour of
orthotropic materials using evolutionary algorithms. IUTAM Symposium on Evolutionary Methods in Mechanics, Cracow, Polony, 24-27 September, 2002. (oral
presentation)
2001 (1)
[1]
Morais, J.; Xavier, J.; Dourado, N.; Lousada, J. Measuring the mechanical behavior of
wood in the orthotropic directions. 1st International Conference of the European
Society for Wood Mechanics, Parviz Navi (Ed.), pp. 355-363, EPFL, Lausanne,
Switzerland, 19-21 April, 2001. (poster presentation)
Articles on national congresses
2015 (2)
[34]
[33]
Carneiro, C.; Neves, N.; Xavier, J.; Vaz, M. Caracterização do comportamento mecânico
de uma vértebra lombar; com e sem cimentação. 6o Congresso Nacional de
Biomecânica - CNB2015, Monte Real, Leiria, Portugal, 6-7 de fevereiro, 2015. (oral
presentation) m
Pinto, V.C.; Xavier, J.; Gonçalves, C.; Magalhães, F.D.; Guedes, R.M. Degradação
hidrolítica de nanocompósitos poliméricos de PLA/CNT-COOCH e PLA/GNP para
substituição de tecidos ligamentares. 6o Congresso Nacional de Biomecânica CNB2015, Monte Real, Leiria, Portugal, 6-7 de fevereiro, 2015. (oral presentation) m
2014 (8)
[32]
Pereira, J.C.R.; de Jesus, A.M.P.; Fernandes, A.A.; Xavier, J. ULCF and cyclic elastoplastic behaviour of linepipe steel grades. 9◦ Congresso Nacional de Mecânica Experimental, Universidade de Aveiro, Aveiro, 15-17 outubro, 2014. (oral presentation)
[31]
Xavier, J.; Oliveira, J.; Monteiro, P.; Morais, J.J.L.; de Moura, M.F.S.F. Direct method
for determining the cohesive law of Pinus pinaster in mode I by digital image correlation.
XIV Portuguese Conference on Fracture - PCF2014, University of Trás-os-Montes
e Alto Douro, Hotel Douro, Régua, Portugal, 6-7 February, 2014. (oral presentation)
m
Xavier, J.; Fernandes, J.R.A.; Frazão, O.; Morais, J.J.L. Experimental evaluation of
mode I cohesive laws of wood bonded joints combining digital image correlation and
embedded fiber Bragg grating sensors. XIV Portuguese Conference on Fracture PCF2014, University of Trás-os-Montes e Alto Douro, Hotel Douro, Régua, Portugal,
6-7 February, 2014. (oral presentation)
Arteiro, A.; Catalanotti, C.; Xavier, J.; Camanho, P.P. Large damage capability of
non-crimp fabric thin-ply laminates. XIV Portuguese Conference on Fracture PCF2014, University of Trás-os-Montes e Alto Douro, Hotel Douro, Régua, Portugal,
6-7 February, 2014. (oral presentation)
Catalanotti, C.; Xavier, J.; Camanho, P.P. Fracture toughness and crack resistance
curves in the longitudinal compressive failure of polymer composites. XIV Portuguese
Conference on Fracture - PCF2014, University of Trás-os-Montes e Alto Douro,
Hotel Douro, Régua, Portugal, 6-7 February, 2014. (oral presentation)
[30]
[29]
[28]
Curriculum vitæ of J. Xavier
z
July 16, 2015
26/29
[27]
[26]
[25]
Silva, A.L.L.; Carvalho, D.; de Jesus, A.M.P.; Xavier, J.;, Fernandes, A. Mixed mode
I/II fatigue crack propagation. XIV Portuguese Conference on Fracture - PCF2014,
University of Trás-os-Montes e Alto Douro, Hotel Douro, Régua, Portugal, 6-7 February,
2014. (oral presentation)
Pereira, J.C.R.; de Jesus, A.M.P.; Xavier, J.; Fernandes, A. ULCF fatigue behaviour of
pipeline steels. XIV Portuguese Conference on Fracture - PCF2014, University of
Trás-os-Montes e Alto Douro, Hotel Douro, Régua, Portugal, 6-7 February, 2014. (oral
presentation)
Pereira, J.C.R.; Nunes, R.; de Jesus, A.M.P.; Xavier, J.; Fernandes, A. Characterization
of the ULCF fatigue behaviour of the X52 steel by means of cyclic bending tests. XIV
Portuguese Conference on Fracture - PCF2014, University of Trás-os-Montes e
Alto Douro, Hotel Douro, Régua, Portugal, 6-7 February, 2014. (oral presentation)
2013 (2)
[24]
[23]
Pereira, J.L.; Xavier, J.; Morais, J.; Lousada, J. Avaliação da qualidade da madeira de P.
pinaster através da variação espacial das propriedades elásticas perpendiculares ao grão,
ao nível do tronco. 7◦ Congresso Florestal Nacional “Florestas - Conhecimento e
Inovação”, Vila Real/Bragança, Portugal, 5-8 de Junho de 2013. (oral presentation)
m
Pinto, V.; Xavier, J.; Pinto, A.; Magalhaes, F.D.; Guedes, R. Estudo mecânico de
nanocompósitos PLA/GNP e compósitos PLA/biovidro para desenvolvimento de dispositivo ligamentar 5◦ Congresso Nacional de Biomecânica (CNB2013), Fórum de
Arte e Cultura de Espinho, Espinho, Portugal, 8-9 Fevereiro 2013. (oral presentation)
m
2012 (3)
[22]
[21]
[20]
Fernandes, P.; Silva, P.; Sena-Cruz, J.; Xavier, J.; Barros, J.; Coelho, M. Diferentes
métodos de avaliação do comportamento da ligação de laminados de CFRP ao betão
de acordo com a técnica NSM. Encontro Nacional Betão Estrutural, FEUP, 24-26
October 2012. (oral presentation) m
Belini, U.; Xavier, J.; Lousada, J.; Morais, J.; Tomazello Filho, M. Caracterização do
módulo de elasticidade de compósitos de madeira por deflectometria. XIII Encontro
Brasileiro em Madeiras e em Estruturas de Madeira, Campus da UFES, Vitoria,
Espírito Santo, Brasil, 23-25 July, 2012. (oral presentation) m
Pereira, J.C.; de Jesus, A.M.P.; Xavier, J.; Fernandes, A. Ultra low-cycle fatigue behaviour of a structural steel. 13th Portuguese Conference in Fracture, Faculty of
Science and Technology, University of Coimbra, Portugal, 2-3 February, 2012. (oral
presentation) m
2011 (2)
[19]
Xavier, J.; Belini, U.; Moura, J.; Morais, J.; Lousada, J.; Tomazello, M. Characterisation
of MDF panels from full-field measurements. 1◦ Congresso Ibérico-Latino Americano
de Madeira na Construção, CIMAD11, Universidade de Coimbra, Coimbra, 7-9 Junho,
2011. (oral presentation)
Curriculum vitæ of J. Xavier
z
July 16, 2015
27/29
[18]
Martins, J.; Xavier, J.; Correia, J.; de Jesus, A.M.P.; Morais, J.; Salavessa, E. Caracterização do comportamento mecânico de elementos de madeira recorrendo à técnica de
correlação digital de imagem. 1◦ Congresso Ibérico-Latino Americano de Madeira
na Construção, CIMAD11, Universidade de Coimbra, Coimbra, 7-9 Junho, 2011. (oral
presentation)
2010 (5)
[17]
[16]
[15]
[14]
[13]
Sousa, A.M.R.; Xavier, J.; Vaz, M.; Morais, J.J.L.; Filipe, V.M.J. Measurement of displacement fields with sub-pixel accuracy by combining cross-correlation and optical flow.
8◦ Congresso Nacional de Mecânica Experimental, G. Vasconcelos et. al. (Eds.),
Livro de Resumos: pp. 253-254, CD-ROM: artigo completo, APAET, Universidade do
Minho, Guimarães, 21-23 Abril, 2010. (oral presentation) m
Pereira, J.; Xavier, J.; Morais, J.; Lousada, J.; Pierron, F. On the evaluation of elastic
properties of P. pinaster at the growth ring scale. 8◦ Congresso Nacional de Mecânica
Experimental, G. Vasconcelos et. al. (Eds.), Livro de Resumos: pp. 105-106, CDROM: artigo completo, APAET, Universidade do Minho, Guimarães, 21-23 Abril, 2010.
(oral presentation)
Xavier, J.; de Jesus, A.M.P.; Morais, J.; Pinto, P. Characterisation of the modulus of
elasticity of wood by compression tests parallel to the grain. 8◦ Congresso Nacional
de Mecânica Experimental, G. Vasconcelos et. al. (Eds.), Livro de Resumos: pp.
107-108, CD-ROM: artigo completo, APAET, Universidade do Minho, Guimarães, 21-23
Abril, 2010. (oral presentation)
Camanho, P.P.; Dávila, C.G.; Lopes, C.S.; Catalanotti, G.; Bessa, M.A.; Xavier, J. On
the relation between cohesive laws and resistance curves in the tensile and compressive
longitudinal failure of composites. Conferência Ibérica de Fractura e Integridade
Estrutural, FEUP, Porto, 17-19 Março, 2010. (oral presentation) m
Pereira, F.A.M.; Dourado, N.; Morais, J.J.L.; de Moura, M.F.S.F.; Xavier, J.; Dias,
M.I.R.; Azevedo, J.M.T. Mode I fracture of cortical bone tissue. Conferência Ibérica
de Fractura e Integridade Estrutural, FEUP, Porto, 17-19 Março, 2010. (oral presentation)
2009 (1)
[12]
Ribeiro, J.; Lopes, H.; Vaz, M.; Xavier, J. Estudo numérico e experimental do campo
de deformações na interface osso-implante. Congreso de Métodos Numéricos en
Ingeniería, Barcelona, Espanha, 29 Junho-2 Julho, 2009. (oral presentation)
2008 (2):
[11]
[10]
Custódio, P.; Tranchete, T.; Morais, J.; Guedes, R.; Xavier, J. Influência da humidade
e do envelhecimento físico no comportamento elástico de um époxido. 7◦ Congresso
Nacional de Mecânica Experimental, A. Jesus & J. Pinto (Eds.), Livro de Resumos,
pp. 101-103, APAET, UTAD, Vila Real, 23-25 Janeiro, 2008. ISBN: 978-972-669-8517. (oral presentation)
Xavier, J.; Avril, S.; Pierron, F.; Morais, J. Characterisation of the radial variability of
stiffness parameters of P. pinaster by the virtual fields method. 7◦ Congresso Nacional
de Mecânica Experimental, A. Jesus & J. Pinto (Eds.), Livro de Resumos, APAET,
UTAD, Vila Real, 23-25 Janeiro, 2008. ISBN: 978-972-669-851-7. (oral presentation)
2005 (1)
Curriculum vitæ of J. Xavier
z
July 16, 2015
28/29
[9]
Xavier, J.; Garrido, N.; Morais, J.; Pinto, J.; Camanho, P.P. Estudo numérico e experimental do método do vão variável para a identificação das propriedades elásticas da
madeira. 6◦ Congresso Nacional de Mecânica Experimental, APAET, Universidade
dos Açores, 27-29 Julho, 2005. (oral presentation)
2004 (2)
[8]
[7]
Oliveira, J.; Xavier, J.; Morais, J. Utilização do ensaio de Arcan para a identificação do
comportamento ao corte da madeira de pinho. I◦ Congresso Ibérico: a madeira na
construção, Universidade de Minho, Guimarães, 25-26 Março, 2004. (oral presentation)
m
Garrido, N.; Xavier, J.; Morais, J.; Lousada, J. Medição das propriedades elásticas ao
corte da madeira de pinho através do ensaio “off–axis”. I◦ Congresso Ibérico: a
madeira na construção, Universidade de Minho, Guimarães, 25-26 Março, 2004. (oral
presentation)
2003 (4)
[6]
[5]
[4]
[3]
Xavier, J.; Oliveira, J.; Morais, J.; Camanho, P.P.; Pierron, F. Measurement of the
shear modulus of wood P. pinaster Ait. by the Iosipescu test: numerical aspects. Livro
de Actas do VII Congresso Nacional de Mecânica Aplicada e Computacional, Vol.
I, Universidade de Évora, 14-16 Abril, 2003. (oral presentation) m
Oliveira, J.; Xavier, J.; Morais, J. Análise por elementos finitos do ensaio de Arcan
aplicado à madeira de P. pinaster Ait. Livro de Actas do VII Congresso Nacional de
Mecânica Aplicada e Computacional, Vol. II, Universidade de Évora, 14-16 Abril,
2003. (oral presentation)
Garrido, N.; Xavier, J.; Morais, J. Determinação do comportamento ao corte da madeira
de P. pinaster Ait. usando o ensaio de “off–axis”: Análise por elementos finitos. Livro
de Actas do VII Congresso Nacional de Mecânica Aplicada e Computacional, Vol.
II, Universidade de Évora, 14-16 Abril, 2003. (oral presentation)
Pereira, J.; Xavier, J.; Morais, J. Estudo por elementos finitos dum novo método para
a medição das propriedades elásticas da madeira de P. pinaster Ait. nas direcções
perpendiculares ao grão. Livro de Actas do VII Congresso Nacional de Mecânica
Aplicada e Computacional, Vol. II, Universidade de Évora, 14-16 Abril, 2003. (oral
presentation)
2001 (1)
[2]
Xavier, J.; Dourado, N.; Morais, J.; Conceição António, C. Identification of elastic properties of orthotropic materials using evolutionary algorithms. 4◦ Encontro Nacional
de Análise Experimental de Tensões e Mecânica Experimental, Livro de Resumos,
pp. 145-146, APAET, Instituto Politécnico de Bragança, Escola Superior de Tecnologia
e Gestão, 17-19 Outubro, 2001. ISBN 972-95631-4-4. (oral presentation)
2000 (1)
[1]
Morais, J.; Moura, M.; Xavier, J.; Marques, A. In-plane mechanical behaviour of a
glass/epoxy composite. 2◦ Encontro da Sociedade Portuguesa de Reologia, Livro
de Actas, pp. 243-252, SPR, FEUP, Porto, 7-8 Abril, 2000. (oral presentation)
Curriculum vitæ of J. Xavier
z
July 16, 2015
29/29