Mathis
Test for slipproof products
on paper
Type PAP
Mathis
Mathis
Mathis
Mathis
Mathis
Laboratory equipment to test
slipproofing agents applied on paper
samples.
Samples are placed on surface that
inclines up to an angle of 60°, driven by
remote control, and adjustable inclining
speed.
PAP :
Equipment developed to compare slipping of paper samples with and without slipproofing agents.
Apparatus made of stainless steel, panel integrated with digital display of inclining angle. Panel
located on lateral of equipment.
A gear-motor moves the board that inclines in different angles up to a maximum of 60°. Provided
with remote control (connected through cable), with three push buttons: one to start moving board
up, a second to move the board down, and a third button to stop. A digital display shows the angle.
The samples (paper sheets, boxes) are placed on the board, which inclines. When the first sample
starts slipping the operator stops the board from moving on through remote control, and reads the
angle indicated on the display.
With a new start to move up on the remote control, the operator continues with the test until the
second sample starts slipping on another angle.
speed potenciometer
for up and down
movement of the board
display with angle
of the board
(max. 60°C)
sample
main switch
(on/off)
To evaluate paper samples
aluminum holders may be
used:
remote control to start and stop inclining
movement of board
Technical Data
PAP
paper
sample
Digital display to show inclining angle
up to 60°C
Motor
200 W
Dimensions
L = 39cm P = 50cm H = 50cm
parafusos
para fixar
amostras
Aparelhos de Laboratório para Indústria Têxtil
Máquina de Tingir Fitas
Estamparia e Coating
Automação Industrial
Aparelhos de Laboratório Mathis Ltda
Estrada dos Estudantes 261
CEP 06707 -050 COTIA - SP, Brasil
Fone: (011)4612-2333
Fax: (011)4612-2598
E-mail: brasil @ mathisag.com Site: www.mathis.com.br
Matriz: Werner Mathis AG - Suíça
Filial: Werner Mathis U.S.A Inc
Homepage:
-
Fone: 0041 1-852 50 50
- Fone: 001-704-786-6157
www.mathisag.com