Technology Day Brasil Agenda
Sessão
Feira, 12 de Setembro, 2013
Curso 1
Curso 2
Curso 3
Curso 4
Curso 5
Telecom
Medição
Industrial & Sensores
Automotivo e DLP
Processadores &
Microcontroladores
8:30 to 9:30 a.m.
9:30 to 10:30 a.m.
Registro – Welcome Coffee e Exposição
Solucione Problemas de
Interoperabilidade do Sistema
1 usando tradutores de tensão e
os produtos 12C da TI –
(Em Ingles)
10:30 to 10:40 a.m.
10:40 to 11:40 a.m.
Como utilizar o software de
desenvolvimento de Clock
2 com dispositivos LMK/LMX
(Em Portugues)
Soluções de Medição da TI Zigbee Smart Energy para o
HAN (Em Ingles)
Intervalo
Portfolio de Bluetooth incluindo Monitoramento de Distribuição Tendencias em Soluções de
Bluetooth de baixo consumo e de Energia, Temperatura,
Power para área Automotiva
Soluções de modo duplo
voltagem e corrente (Em Ingles) (Em Portugues)
(Em Ingles)
Fundamentos em Proteção de
Circuito: Mercado, tecnologia,
3
tendencias e o que a TI tem de
novo (Em Ingles)
Ligue-se no Smart Grid
(Em Ingles)
Como processadores baseados
em ARM™ Cortex A15 Key4 Stone viabilizam aplicações de
Networking (Em Ingles)
Projeto de Concentrador de
dados para Rede Inteligente
(Em Ingles)
2:30 - 2:35 p.m.
2:35 - 3:35 p.m.
3:35 - 4:00 p.m.
4:00 - 5:15 p.m.
5
Ethernet e Interface Industrial
(Em Portugues)
Join the conversation #TItechday
Led Lighting e LCD backlighting
para área Automotiva (Em Ingles)
®
11:40 a.m.- 1:30 p.m.
1:30 - 2:30 p.m.
Técnicas de Medição de
Temperatura usando
Conversores Sigma Delta
(Em Ingles)
Soluções Flexiveis de PLC para
Rede Inteligente (Em Ingles)
Almoço/Exposição
Bases do Condicionamento de
Sinais e novas tendencias em
tecnologia (Em Ingles)
Introdução Tecnica no Sub1GHz de longo alcance da TI
(Em Ingles)
Intervalo
InstaSPIN™: Seu proprio Expert Introduzindo a familia PCM186x
para Controle de Motores
de dispositivos front end para
1 de 2 (Em Ingles)
audio e dicas de projeto de
amplificadores de potencia
Classe D (Em Ingles)
Lanche e Exposição
InstaSPIN™: Seu proprio Expert Incrementando o poder dos DLP
para Controle de Motores –
(microespelhos) em aplicações
2 de 2 (Em Ingles)
inovadoras (Em Ingles)
Novo na Familia de Microcontroladores MSP430™: Participe
e obtenha uma Visão Geral e
roadmap do MCU de mais baixo
consumo (Em Portugues) Introdução a plataforma de
desenvolvimento BeagleBone
Black (Em Portugues)
Comece a desenvolver
com o TIVA™ serie C EKTM4C123GLX Launchpad
(Em Portugues)
TI RTOS: Solução RTOS para
Clientes de de
microcontroladoes da TI
(Em Portugues)
Usando SimpleLink™ WiFi
CC3300 para automação
residencial e sensores
conectados na Nuvem (Em
Ingles)
O bar da plataforma, ZibBee, ARM, InstaSPIN, MSP430, Tiva C, e SimpleLinks são marcas comerciais da Texas Instruments.
Todas as outras marcas são de propriedade de seus respectivos proprietários.
© 2013 Texas Instruments Incorporated.
Brazil Tech Day 2013 Session Titles and Abstracts
Track 1 – Telecom
Solving System Interoperability Issues Using Voltage Translation
and I2C Products from TI – (in English)
Interoperability issues are a fact of life in today’s large and complex electronic
systems. With BOMs frequently running hundreds if not thousands of components, system interoperability is an inevitable challenge. This presentation will
focus on two common areas where many interoperability problems exist, I2C and
voltage translation. While I2C is ubiquitous in today’s systems it is a very broad
spec covering very wide loading conditions, operating speed and a fairly limited
address space. As processors move to lower voltage nodes, interfacing them to
peripherals which don’t support those lower voltages is probably one of the most
common issues system engineers face. In both topics we will discuss TI’s wide
variety of products that can be used to solve these problems and other system
considerations to take into account when choosing these products.
How to Use the Clock Design Tool Software to Design with
LMK/LMX Devices – (in Portuguese)
The Clock Design Tool is a powerful offline software tool intended to assist in part
selection, loop filter design, and phase noise simulation for clock generators/jitter
cleaners (LMK) and frequency synthesizer (LMX) devices. The presentation will
include a guided tour of the tool’s key capabilities & limitations, basic design flow,
and device PLL configuration & simulation features. Participants will also be
given hands-on experience with the tool to select, design, and simulate a solution
to meet a given set of design requirements. Participants are invited to bring their
own laptops with installed software to follow along. Find the software at www.
ti.com/tool/clockdesigntool.
Circuit Protection Fundamentals: Market/Technology Trends
and What’s New From TI – (in English)
We will cover the basics of circuit protection including hotswap, inrush control,
over/undervoltage, FET SOA, surges and transients. Techniques for avoiding
common design and test errors will also be reviewed. TI is working in a number
of growing protection markets and has growing product families to support them.
These include PMBus protection/monitoring, integrated FET eFuses, High Power
POE, and USB charging controllers. We will review these as time and interest
allow. This presentation is intended to be interactive and attendees are
encouraged to ask questions.
How KeyStone A15-Based Processors Enable Networking
Application – (in English)
Traditionally Networking control plane has been domination by x86 and Power
architectures supported sometimes by FPGA based or specialized accelerators.
However in the recent years the entire networking industry is looking for greener
alternatives and actively considering RISC based processors which is low power
but powerful enough to meeting the processing needs; enter Cortex A-15 core
from ARM® as an alternative. Just the core performance however is not sufficient
to realize the theoretical performance if the overall SoC architecture does not
enable that. KeyStone is an architecture to create infrastructure grade A15 based
processor. The topic of discussion for today is to highlight what specific applications within the networking domain KeyStone architecture enables, market
feedback and the differentiating features of KeyStone.
Ethernet and the Industrial Interface – (in Portuguese)
Ethernet is everywhere, but it’s not the same Ethernet everywhere. There are
specific requirement in designing a robust industrial/communications Interface.
This session will provide an Introduction to Ethernet and physical properties
and constraints. Topics covered will include real world examples to enable your
end product to have competitive edge- deterministic latency, jitter tolerance,
IEEE1588 and cable diagnostics. We will cover MAC interfaces and best practice
layout techniques.
Track 2 – Metering
TI Metering Solutions: ZigBee® Smart Energy for the HAN –
(in English)
This presentation provides an in-depth discussion of how the ZigBee Smart
Energy application profile is used by devices in the HAN (Home Area Network)
for smart grid deployments. An example eco-system of an ESP (Energy Service
Portal), an in-premise display (that displays price and consumption information
to the user), load control, and simple meter devices (such as a gas meter) is
discussed to explain the secure communication model of such a network as well
as commissioning aspects related to ZigBee Smart Energy security. Available
TI system solutions for ZigBee®HAN devices are also discussed.
TI Bluetooth® Portfolio Including Bluetooth Low Energy,
Bluetooth Classic and Dual Mode Solutions – (in English)
With the first Bluetooth® Low Energy (BLE) to market – TI is leading the industry
with its complete offering of Bluetooth, BLE, and dual mode solutions. In this
session we will review the TI Bluetooth ecosystem, including TI’s CC2560 and
CC2564 Bluetooth devices (available now in a low cost QFN package) and
industry leading CC2540 and CC2541 BLE devices. We’ll explore the software
stacks, use cases and profiles, and royalty free options available to your
customers. Learn how to build memory optimized data applications, how to
select the right microcontroller for your Bluetooth profiles and how to take
advantage of TI tools to speed up your design.
Plug into the Smart Grid – (in English)
The conference provides a complete description of the TI solutions for the Smart
Grid. This includes the detailed presentation of the metrology piece, including
the new Stellaris® devices that address the host processor applications such as
encryption and communication channels management through Free-RTOS. From
the communication side, RF is discussed in depth with the sub-1GHz as well
as the 802.15.4 roadmaps, including the latest evolutions of the ZigBee® stack
and Smart Energy profile. Power Line Communication is also a key focus of the
speech due to the opportunities that are emerging in US and South-America.
Specific guidelines are provided to appropriately position the TI offer vs. other
market solutions such as Home-Plug and G.hn. The TI Smart Meter Board is
demonstrated at the end of the Q&A session and illustrates the TI know-how in
Smart Metering.
Data Concentrator Design for Smart Grid – (in English)
Data Concentrators are present to communicate with hundreds of energy, water
and gas meters in the Smart Grid. Data Concentrators (DC) design is quite complex with its function as data collectors, data aggregators and network optimizers. In this session you will learn the design methodologies and challenges that
exist in DC design. You will learn the various architectures that are possible for
DC using Stellaris, C2000™ and ARM® MPU. You will also learn the various wired
and wireless communication methods DC use to talk to these meters.
Flexible Power Line Communication Solutions for Smart Grid –
(in English)
Power-line communication (PLC) is a promising technology that provides
effective communication method without additional cost to build infrastructure.
Recently, this technique is being spotlighted for smart grid applications such
as smart electric meters, lighting, solar application, electric vehicle charging,
smart appliances, home automation, intelligent building control, and smart grid
networking. Texas Instruments’ C2000™ devices are 32 bit microcontrollers with
high performance integrated peripherals designed for real-time applications. Its
math-optimized core gives us the means to improve system efficiency, reliability,
and flexibility. A novel aspect of our work is to implement narrow band PLC
solutions in software, which maximizes flexibility and allows easy-to-maintenance while minimizes the performance degradation by virtue of the mathoptimized core in C2000 devices. We present our flexible PLC solutions of PRIME,
G3, and FlexOFDM working on a single TI C2000 device.
Track 3 – Industrial & Sensing
Temperature Sensor Measurement Techniques using Delta
Sigma Converters – (in English)
Today’s Delta-Sigma Converters are highly integrated devices often used
with RTDs, thermocouples and Thermistors to perform precision temperature
measurements in Industrial Applications. A Delta-Sigma converter such as the
ADS1248 and LMP90100 incorporate a digital filter, voltage reference, internal
amplifier and programmable excitation sources to configure the device in different configurations. However, the circuit designer working in the application environment faces many questions: What are the optimal circuits and configuration
settings to perform the measurement? What are the considerations when choosing the external circuit components and necessary anti-aliasing filters? This
presentation will explore circuit design considerations and trade-offs, calibration
techniques, sensor linearization methods, and measurement error analysis. The
presentation will provide a detailed look at RTD ratiometric measurements and
anti-alias filter design considerations. The presentation will include circuits with
experimental results using the ADS1248.
www.ti.com/techdays
Distributed Power Monitoring: Temperature, Voltage
and Current – (in English)
Today’s board and system design engineers face many challenges that can
threaten to delay their new product development. Achieving optimal system
performance on the first pass is key to a successful product development and
go-to-market strategy. This session will discuss how Texas Instruments is addressing the rapidly emerging market for distributed power monitoring with an
emphasis on improving monitoring accuracy, improving system performance
while at the same time reducing system costs. The session will be broken into
two halves. The first half will focus on accurately sensing current, voltage and
power with an emphasis on identifying and understanding sources of errors with
a goal to reduce and/or eliminate these sources of errors. The second half will
focus on temperature sensing with an emphasis in theory of operation of local
and remote junction temperature sensors, challenges affecting measurement
accuracy and sensing and communications in noisy environments.
Sensor Signal Conditioning Basics and Technology Trends –
(in English)
adaptive slope control, hybrid dimming schemes, I2C or SPI programmability,
backlighting safety monitoring, adjustable backlight compatibility and LCD display
synchronization. This session will focus on how the feature set of this device
improves display performance, aids lower panel temperature and reduces EMI
signature.
Automotive Power Solutions Trends – (in Portuguese)
This presentation will focus on power management trends in the vehicle, focusing on Infotainment and Cluster, ADAS, Powertrain and Body Electronics systems,
showing how power management systems within the vehicle attribute to higher
efficiency, smaller size, lower noise and lower quiescent current within the
vehicle. HEV/EV and start-stop technologies adding new requirements to the car,
such as: increasing the power demand on the system with brushless DC motors
for transmission oil pumps, cooling fans, fuel pumps, water pumps; Li-Ion battery systems and the battery management needed for these systems within the
vehicle; AC/DC charging systems and bi-directional power requirements for dual
battery systems.
Sensors are used to convert a physical quantity (such as pressure) to an electrical
signal. Example sensors used in industrial and automotive applications include
pressure sensors, temperature sensors, and humidity sensors. A sensor signal
conditioner is used to process the output of the sense element and to generate
a signal that can be interfaced with the control system. In this presentation, we
will introduce three specific sensor signal conditioning solutions offered by TI:
1) die solutions, 2) high temperature (>125C) solutions, and 3) integrated
solutions. We will then discuss in detail the PGA400, which is an integrated
solution, for pressure sensor signal conditioning. Specifically, the block diagram
of the device and pressure sensor calibration using the PGA400 will be explained.
The presentation will then conclude with roadmap overview for integrated signal
conditioning solutions from TI.
TI Sub-1 GHz Long Range – Technical Introduction – (in English)
InstaSPIN™: Your Own Personal Motor Control Expert
(session 1 of 2) (in English)
The PCM186x family incorporates high performance ADC’s(106db) with up to
4 channels and a highly flexible front end. The PCM186x family comes with
front end mixer, multiplexer and programmable gain amplifier with differential,
pseudo-differential and single ended input support. Presentation will cover
family features/ benefits, and possibly have a demo as well. This session will
then delve into Class D Audio Amplifier Design basics for success. The talk will
revolve around principles of effective PCB layout and show a successful EVM
PCB layout as an example. Will also talk about layout success for improved audio
quality, EMC emissions and thermal effectiveness.
You’re an expert on your product. Do you have to be a motor control expert too?
The InstaSPIN™ family of premium motor control solutions from Texas Instruments ensures that you do not, and LineStream Technologies will show you why.
Join us as we explore InstaSPIN-FOC and -MOTION, TI’s solutions for sensored
and sensorless FOC torque and speed control. We’ll demonstrate how the
InstaSPIN family optimizes your motor’s efficiency, performance, and reliability regardless of your level of motor control knowledge. In this interactive session,
you’ll learn about the solutions and their components; you’ll see the solutions in
action; and you’ll learn how to use these solutions for your own application.
InstaSPIN™: Your Own Personal Motor Control Expert
(session 2 of 2) – (in English)
You’re an expert on your product. Do you have to be a motor control expert too?
The InstaSPIN™ family of premium motor control solutions from Texas
Instruments ensures that you do not, and LineStream Technologies will show you
why. Join us as we explore InstaSPIN-FOC and -MOTION, TI’s solutions for sensored and sensorless FOC torque and speed control. We’ll demonstrate how the
InstaSPIN family optimizes your motor’s efficiency, performance, and reliability
- regardless of your level of motor control knowledge. In this interactive session,
you’ll learn about the solutions and their components; you’ll see the solutions in
action; and you’ll learn how to use these solutions for your own application.
Track 4 - Automotive and DLP
LED Lighting and LCD Backlighting Solutions for Automotive –
(in English)
TI is heavily focused and invested in solutions for the automotive market and
the growth opportunity requires artifact free LCD displays and high efficacy LED
backlighting technology. Tell-tale solutions are one area of LED Lighting , and
examples from very low cost solution (simple Darlington array) to cost effective
power shift registers, and the high end constant current sinks will be shown. TI’s
tell-tale solution offers high voltage rating, protections and diagnostics needed
in cluster application. With respect to LCD backlighting, the LP8860 is a new
4-Channel LCD backlighting driver optimized for automotive panels. It provides
high performance LED backlight driver features focused on the challenges in
automotive applications. While accepting a wide input voltage range and withstanding direct automotive load-dump events, the LP8860 enables advanced
features such as high resolution brightness control, adaptive boost control,
This presentation is a technical introduction to TI LPRF’s sub-1 GHz offerings. 3
topics are covered: 1) Factors influencing radio range and the importance of coexistence and the ability to operate in hostile RF environment like automotive, 2)
How to achieve low power consumption by taking advantage of on-chip features
especially designed to optimize battery lifetime needed for keyless entry systems
and TPS systems. 3) Introduction to development tools that will greatly reduce
the evaluation and development times.
Introducing PCM186x Family of Audio Front End Devices and
Class-D Audio Power Amplifiers Design Basics for Success –
(in English)
Leveraging the Power of Micromirrors in Innovative Applications –
(in English)
DLP Technology is being used to steer or program light in innovative equipment
across industrial, medical, and agriculture markets. The broad spectrum of
applications include machine vision, 3D metrology, 3D printing, dental scanning,
vascular imaging, photo therapy, hyperspectral imaging, confocal microscopy,
and food / agriculture analysis to name a few. In this session, participants will
learn how they can use light to create non-contact products that solve real-world
problems faster and/or more accurately. The participants will also “know how” to
start prototyping with available DLP development tools and resources.
Track 5 – Embedded Processors
New to MSP430™ – Overview and Roadmap Update for the
World’s Lowest Power Microcontroller Family – (in Portuguese)
Get an update on MSP430™ MCUs, featuring FRAM products based on Wolverine technology, the lowest power microcontroller family on the planet. This session will provide an overview of the MSP430 portfolio, cover various applications
that suit the MSP430 well & will also cover the hardware and software development ecosystem that surrounds it. Attendees will also get a glimpse of the future
of MSP430 with a roadmap update
Introduction to BeagleBone Black – (in Portuguese)
In this session Beagle enthusiasts, developers and hobbyists will learn about the
recently released lower-cost next generation BeagleBone, BeagleBone Black; that
supports AM335x Sitara™ ARM® Cortex-A8 Processors. You will learn about new
features and how it compares to the original BeagleBone. In addition, you will see
how easy it is to get started with the quick the out of box experience and how to
expand functionality by using the Cape plug-in boards. This low-cost development kit is sure to be something that everyone wants.
Join the conversation #TItechday
www.ti.com/techdays
Getting Started With the Tiva™ C Series EK-TM4C123GXL
LaunchPad™ Workshop – (in Portuguese)
In this session you will learn about the new Tiva™ C Series TM4C123x ARM®
Cortex TM-M4F MCUs and how to start developing using the Tiva C Series EKTM4C123GXL LaunchPad™. The Tiva C Series EK-TM4C123GXL LaunchPad is
a low-cost, versatile evaluation kit that provides developers with everything they
need to start designing new applications. The evaluation board features on-board
emulation, which means you can program and debug your projects without the
need for additional tools. Two dual-gender, 20-pin stackable headers provide
great connection options out of the box. These 40 pins allow you to add support
for displays, wireless interfaces, sensors and other capabilities to your projects
very easily and also offer basic compatibility with existing MSP430™ and
C2000™ LaunchPads. For more information visit www.ti.com/launchpad.
TI-RTOS: An RTOS Solution for TI MCU Customers –
(in Portuguese)
As microcontrollers (MCUs) increasingly offer standard communications peripherals and larger memories on-chip, developers are faced with greater software
complexity. This session will overview the TI-RTOS, which provides an integrated
set of development tools and embedded software components (including SYS/
BIOS and StellarisWare®/MWare), enabling developers to focus on application
differentiation and easily port to other TI MCUs. We will begin with the business
model, and licensing terms and then discuss each embedded software compo-
nent, including the RTOS, file system, USB, TCP/IP, wireless stacks, and device
drivers, which reduce the effort required by developers to add feature such as
Ethernet or USB connectivity to their products. In addition, we will illustrate the
configuration tools associated with these components that enable developers
to optimize features and footprint for their application. We will conclude with a
summary of the roadmap and release schedule for each MCU family and which
boards are supported.
Using SimpleLink™ WiFi CC3000 for Home Automation and Cloud
Connected Sensors (in English)
The Internet of Things (IOT) revolution is gaining momentum as more and more
devices are connected to the Internet, enabling new lifestyles, novel services and
global connectivity. Bringing the Internet to new devices beyond PCs and mobile
devices, SimpleLink™ WiFi CC3000 enables Internet connectivity in microcontroller-based applications using your home WiFi network. In this presentation,
you will learn how to use SimpleLink with microcontrollers such as MSP430™
to connect home appliances, lights, smart plugs, thermostats, security systems
and sensors to the home network and to the Internet. You will also learn how to
control and monitor your CC3000 enabled devices with a smartphone, a tablet or
a PC from anywhere in the world using a cloud-based server.
www.ti.com/techdays
Join the conversation #TItechday
The platform bar, ZibBee, InstaSPIN, MSP430, Tiva C, and SimpleLinks
are trademarks of Texas Instruments. All other trademarks are the
property of their respective owners
© 2013 Texas Instruments Incorporated
Printed in the U.S.A