TX54 Mobile Shielding Door 106th CEMESTE – 13.06.07 N. Dos Santos/ TS-LEA •Floor steel plates and anchors system •Chassis assembly •Chassis concreting •Concrete blocks installation and survey N. Dos Santos 1 TX54 N. Dos Santos 2 What is TX54 Mobile Shielding Door? • • • • • • • 1 chassis (20T of steel) 4 airpads (125T each) 20 m rail for chassis guiding 12m3 of concrete (inside chassis) 14 pre-fabricated concrete blocks 3m x 4.3m x 7m, 250T 2 tirfor and anchors system N. Dos Santos 3 TX54 Door – Floor plates and anchors 6mm steel plates, fixed to floor and welded together for airpads N. Dos Santos 4 TX54 Door – Floor plates and anchors Wall and floor anchors Trifor will move the 250t door with airpads N. Dos Santos 5 TX54 – Chassis Assembly 2 weeks assembly by Pakistan team - IHEP N. Dos Santos 6 TX54 – Chassis Assembly Assembly at bottom of PM54 shaft N. Dos Santos 7 TX54 – Shimming and rail installation Shimming done between airpads and chassis feet N. Dos Santos 8 TX54 – Chassis Concreting Concreting done by TS-CE contractor (Scrasa) N. Dos Santos 9 TX54 – Chassis Concreting 12m3 of concrete – 10 trips with SDX5 overhead crane N. Dos Santos 10 TX54 – Chassis Concreting Concrete drying N. Dos Santos 11 TX54 – Next steps… • Airpads connections • Movement test, this week • Survey to be done with chassis under shaft and on it’s final position • 12 pre-fabricated concrete blocks delivered and installed on chassis, 25th June (14T each block), with survey • 2 last blocks delivered end of July • Door movement with all blocks 12m3 of concrete – 10 trips with SDX5 overhead crane N. Dos Santos 12