BIBLIOGRAFIA
102
REFERÊNCIAS BIBLIOGRÁFICAS
Abel, F. and Hines, C. (1978) Base Stabilization with Foamed Asphalt. Interim Report of
the Department of Highways, Denver.
Acott, S.M. and Myburgh, P.A. (1982) Design and Performance Study of Sand Bases
Treated with Foamed Asphalt. Transportation Research Record 898, 290-296.
Akeroyd, F.M. and Hicks B.J. (1988) Foamed bitumen road recycling. Highways, 42-45.
London.
Asphalt Academy (2002) The design and Use of Foamed Bitumen Treated Materials.
Interim Technical Guideline. Pretoria, South Africa.
Bowering, R.H. (1970) Properties and Behaviour of Foamed Bitumen Mixtures for Road
Building. 5th Australian Road Research Board Conference, Canberra, Australia.
Bowering, R.H. and Martin, C.L. (1976) Foamed Bitumen Production and Application of
Mixtures Evaluation and Performance of Pavements. Association of Asphalt Paving
Technologists 45, 453-477. New Orleans, Louisiana.
Brennen, M., Tia, M., Altschaefl, A. and Wood, L.E. (1983) Laboratory Investigation of
the Use of Foamed Bitumen for Recycled Bituminous Pavements. Transportation
Research Record 911, 80-87.
Campo, J. A. (1998) Tratado de estabilización y reciclado de capas de firmes con emulsión
asfáltica, Asociación Española de la Carretera, Espanha.
Castro, L. (2003) Reciclagem a Frio “In Situ” com Espuma de Asfalto - Tese de Mestrado
em Ciências de Engenharia Civil, Universidade Federal do Rio de Janeiro, Brasil.
Clarke, A.R. (1976) Foamed Asphalt of Crushed Rock Pavements. Report 76.3 of Mobil
Oil of Australia, Melbourne South.
Csanyi, L.H. (1957) Foamed Asphalt in Bituminous Paving Mixes. Highway Research
Board Bulletin 10,108-122.
Csanyi, L.H. (1959) Foamed Asphalt. American Road Builders Association (ARBA)
Technical Bulletin 240, 3-14.
Miguel Teixeira
Referências Bibliográficas
103
Egziabher, E. G. (2000) Stabilisation of Cinder with Foamed Bitumen and Cement ad Its
Use as (Sub) Base for Roads. M.Sc. Thesis, Delft University of Technology,
Netherlands.
Engelbrecht, J.C., Roberts, F.L. and Kennedy, T.W. (1985) Cold Recycled Mixtures, with
emphasis on the Curing of Foamed Specimens – A Laboratory Study. Annual
Transportation Convention, Volume T1. Pretoria, South Africa.
EUROSTAT (2005) Estatísticas de Transportes da UE15. EUROSTAT.
FEUP (2001) II Jornadas Técnicas de Pavimentos Rodoviários - Reciclagem de
Pavimentos, eds M.C. Azevedo, J.Q. Ribeiro and A. Teixeira, Porto
Franco, L.H. and Wood, L.E. (1982). Stabilization with Foamed Asphalt of Aggregates
Commonly used in Low-Volume Roads. Transportation Research Record 898, 297302.
Jacinto, M. (2003) Caracterização Estrutural de Pavimentos - Tese de Mestrado de Vias de
Comunicação, Faculdade de Engenharia da Universidade do Porto, Portugal.
Jenkins, K. J. (1999) Mix Design and Performance Prediction of Foamed Bitumen Mixes.
Proceedings of the 7th Conference on Asphalt Pavements for Southern Africa, CAPSA
1999. Victoria Falls, Zimbabwe.
Jenkins, K. J. (2000) Mix Design Considerations For Cold and Half-Warm Bituminous
Mixes With Emphasis on Foamed Bitumen. PhD Dissertation, University of
Stellenbosch, South Africa.
Kendall, M., Baker, B., Evans, P. and Ramanujam, J. (1999) Foamed Bitumen
Stabilisation. Southern Region Symposium, Australia.
Kendall, M., Baker, B., Evans, P. and Ramanujam, J. (2001) Foamed Bitumen
Stabilisation-The Queensland Experience. 20th ARRB Conference, Australia.
Lancaster, J., McArthur L. and Warwick, R. (1994) VICROADS Experience with Foamed
Bitumen Stabilisation. Proceedings of the 17th ARRB Conference. Australia.
Miguel Teixeira
Referências Bibliográficas
104
Lee, D.Y. (1981) Treating Marginal Aggregates and Soils with Foamed Asphalt.
Association of Asphalt Paving Technologists 50, 211-250.
Lewis, A.J., and Collings, D.C. (1999) Cold in place recycling: a relevant process for road
rehabilitation and upgrading. Proceedings of the 7th Conference on Asphalt Pavements
for Southern Africa, CAPSA 1999. Victoria Falls, Zimbabwe.
Maccarrone, S. (1994) Cold Asphalt as an Alternative to Hotmix. Proceedings of the 9th
AAPA International Asphalt Conference. Australia
Muthen, K.M. (1998) Foamed Asphalt Mixes, Mix Design Procedure. Report of the
SABITA Ltd &CSIR Transportek, Pretoria, South Africa.
Pereira, P. e Miranda, V. (1999) Gestão da Conservação de Pavimentos Rodoviários,
edição de autor, Braga.
Pereira, P. e Santos, P.L. (2002) Pavimentos Rodoviários, edição de autor, Braga.
PIARC (2003) Pavement Recycling Guidelines for In-Place Recycling with Cement, InPlace Recycling with Emulsion or Foamed Bitumen, Hot Mix Recycling in Plant;
World Road Association.
Pinto, J. (2003) Caracterização Superficial de Pavimentos Rodoviários - Tese de Mestrado
de Vias de Comunicação, Faculdade de Engenharia da Universidade do Porto, Portugal.
Ramanujam, J. and Jones, J. (2000) Characterisation of Foamed Bitumen Stabilisation.
Road System & Engineering Technology Forum, Australia.
Roberts, F.L., Engelbrecht, J.C. and Kennedy, T.W. (1984) Evaluation of Recycled
Mixtures using Foamed Bitumen. Transportation Research Record 968, 78-85.
Ruckel, P.J., Acott, S.M. and Bowering, R.H. (1983) Foamed-Asphalt Paving Mixtures:
Preparation of Design Mixes and Treatment of Test Specimens. Transportation
Research Record 911, 88-95.
Sakr, H.A. and Manke, P.G. (1985) Innovations in Oklahoma Foamix Design Procedures.
Transportation Research Record 1034, 26-34.
Miguel Teixeira
Referências Bibliográficas
105
Saleh, A. H. (2000) Stabilisation of Mix Granulate by Using Foamed Bitumen for Use in
Road Pavements. M.Sc. Thesis, Delft University of Technology, Netherlands.
Shackel, B., Makiuchi, K. and Derbyshire, J.R. (1974) The Response of Foamed Bitumen
Stabilised Soil to Repeated Triaxial Loading. Proceedings of the 7th ARRB Conference.
Australia.
Shell Bitumen (1990) Shell Bitumen Handbook. Shell Bitumen, U.K.
Wirtgen Group (2001a) Cold Recycling Manual, Windhagen, Germany.
Wirtgen Group (2001b) Foamed Bitumen – The Innovative Technology for Road
Construction, Windhagen, Germany.
World Bank Group (2004) Population Dynamics, World Development Indicators.
BIBLIOGRAFIA
Acott, S.M. (1979) Sand Stabilisation using Foamed Bitumen. Proceedings of the 3rd
Conference on Asphalt Pavements for Southern Africa, 155-172. Durban.
Akeroyd, F.M. (1989) Advances in Foamed Bitumen Technology. Proceedings of the 5th
Conference on Asphalt Pavements for Southern Africa. Swaziland.
Bissada, A.F. (1987) Structural Response of Foamed-Asphalt-Sand Mixtures in Hot
Environments. Transportation Research Record 1115, 134-149.
Castedo, H., Beaudoin, C., Wood, L. and Altschaeffl, A. (1984) Durability Characteristics
of Foamed Asphalt Mixtures. 29th Annual Canadian Technical Asphalt Association
Conference, Montreal, Canada.
Craig, R.F. (1997). Soil Mechanics, 6th Edition, Spon Press, London.
CSIR Transportek (1998) Foamed Asphalt, Mix Design. Disponível no Website
http:\\foamasph.csir.co.za:81/chap4.htm.
Miguel Teixeira
Referências Bibliográficas
106
Jenkins, K.J., de Groot, J.L., van de Ven, M.F., and Molenaar, A.A. (1999) Half-warm
Foamed Bitumen Treatment, A New Process. 7th Conference on Asphalt Pavements for
Southern Africa, CAPSA 1999. Victoria Falls, Zimbabwe.
Jenkins, K.J., van de Ven, M.F., and de Groot, J.L. (1999) Characterisation of Foamed
Bitumen. 7th Conference on Asphalt Pavements for Southern Africa, CAPSA 1999.
Victoria Falls, Zimbabwe.
Maccarrone, S., Holleran, G., Leonard, D.J. and Hey, S. (1994). Pavement Recycling using
Foamed Bitumen. Proceedings of the 17th ARRB Conference. Australia.
Miguel Teixeira
Referências Bibliográficas