Para criar Vlans Catalyst:
Switch#vlan database
Switch(vlan)#vlan 101 name "Grupo 10 Vlan 1"
Switch(vlan)#apply
Switch(vlan)#exit
Para adicionar portas a Vlan criada:
Switch# config terminal
Switch(config)#interface fastethernet 0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 101
Switch(config-if)#no shut
Switch(config-if)#exit
Para adicionar range de portas:
Switch(config)# interface range fastethernet 0/13 – 24
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 102
Switch(config-if)#no shut
Switch(config-if)#exit
Para criar Trunk no Switch
Catalyst:
Switch# config terminal
Switch(config)#interface fastethernet 0/24
Switch(config-if)#switchport mode trunk
Switch(config-if)#switchport trunk allowed vlan all
Switch(config-if)#no shutdown
Switch(config-if)# exit
Para criar Trunk no Roteador:
Router> enable
Router#configure terminal
Router(config)#interface fastethernet 0/0
Router(config-if)#no shutdown
Router(config-if)#exit
Para criar Trunk no Roteador:
Router(config)#interface fastEthernet 0/0.1
Router(config-subif)#encapsulation dot1Q 101
Router(config-subif)#ip address 192.168.10.1
255.255.255.192
Router(config-subif)#no shutdown
Router(config-subif)#exit
Para criar Trunk no Roteador:
Router(config)#interface fastEthernet 0/0.2
Router(config-subif)#encapsulation dot1Q 101
Router(config-subif)#ip address 192.168.10.65
255.255.255.192
Router(config-subif)#no shutdown
Router(config-subif)#exit